Airtac SC100 Standard Cylinder SC100X60S
The AirTAC Airtac SC100 Standard Cylinder SC100X60S is a genuine double-acting standard air cylinder with a Ø100mm bore and 60mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke60 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X60S
The SC100X60S is a 100 mm bore, 60 mm stroke double-acting tie-rod cylinder from the AirTAC SC series, factory-equipped with a built-in magnet (suffix -S). This magnet allows CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for reliable, non-contact end-of-stroke detection without extra brackets. With a push force of 3927 N at 0.5 MPa and a maximum theoretical force of 801 kgf at 1.0 MPa, it handles demanding clamping and pressing tasks in a compact 60 mm stroke format.
The cylinder features a 25 mm diameter piston rod with M20x1.5 knuckle threads, PT1/2 ports, and a 29 mm adjustable air cushion at each end to decelerate the piston smoothly. Its body length A is 188 mm, giving a total extended length of approximately 248 mm. Operating pressure ranges from 0.15 to 1.0 MPa with TPU/NBR seals rated for -20 to +70 °C, and the speed range is 30-800 mm/s.
Airtac SC100 Standard Cylinder SC100X60S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X60S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X60S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X60S Is Used
Heavy-Duty Clamping
The 3927 N push force at 0.5 MPa makes the SC100X60S ideal for pneumatic toggle clamps and welding fixtures where a short, powerful stroke locks parts securely in place.
Part Ejection & Sorting
With a 60 mm stroke and integrated magnet for position sensing, this cylinder reliably ejects or diverts heavy components on packaging and assembly lines, confirming each cycle.
Press-Fit Assembly
The 100 mm bore delivers up to 7068 N at 0.9 MPa, sufficient for pressing bearings, bushings, or pins into housings in automated assembly cells requiring sensor feedback.
Is the Airtac SC100 Standard Cylinder SC100X60S the Right Cylinder?
For applications needing slightly less force in a smaller package, the 80 mm bore SC80 delivers 2513 N push at 0.5 MPa. If the 60 mm stroke is too short for your workholding or ejection sequence, standard strokes up to 1500 mm are available in the SC100 family. Always match a replacement cylinder on five points: 100 mm bore, 60 mm stroke, PT1/2 port thread, the built-in magnet option (-S), and any mounting accessory you already use. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X60S FAQ
At 0.5 MPa it delivers 3927 N push and 3681 N pull. At 0.7 MPa push force rises to 5497 N, and at the maximum operating pressure of 0.9 MPa it reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix in SC100X60S indicates a built-in magnet, so AirTAC CMSG (reed), DMSG, or EMSG (solid-state) sensors clamp directly onto the barrel tie-rods to detect piston position without any modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.