Airtac SC100 Standard Cylinder SC100X60SN
The AirTAC Airtac SC100 Standard Cylinder SC100X60SN is a genuine double-acting standard air cylinder with a Ø100mm bore and 60mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke60 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X60SN
The SC100X60SN is a 100 mm bore, 60 mm stroke double-acting pneumatic cylinder delivering 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa). Its 25 mm rod and PT1/2 ports suit medium-speed clamping and pressing tasks where a short, powerful stroke is needed.
This model includes a built-in magnet (-S) for barrel-mounted CMSG/DMSG/EMSG sensors, and NBR (nitrile) seals for standard temperature resilience. The SC tie-rod design keeps the body length compact at 188 mm plus stroke, making it easy to fit into tight machine frames.
Airtac SC100 Standard Cylinder SC100X60SN Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X60SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X60SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X60SN Is Used
Pneumatic Press
Short 60 mm stroke with 7068 N max thrust for light assembly presses, riveting, or staking operations where consistent force and end-of-stroke sensing are required.
Clamping Fixture
Built-in magnet enables precise clamp/unclamp confirmation via reed sensors, ideal for CNC fixture automation with NBR seals for standard shop air.
Product Stopper Gate
High force in a compact body stops heavy pallets or totes on conveyor lines. The short stroke provides rapid actuation for high-cycle gating.
Is the Airtac SC100 Standard Cylinder SC100X60SN the Right Cylinder?
For higher force, step up to the 125 mm bore (6136 N at 0.5 MPa); for a lighter, faster actuator, the 80 mm bore (2513 N at 0.5 MPa) may be sufficient. The 60 mm stroke is well within the 1500 mm maximum for this bore. When replacing, match bore, stroke, PT port thread, the -S magnet for sensor compatibility, and NBR seal material to ensure identical performance.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X60SN FAQ
At 0.7 MPa operating pressure, the 100 mm bore produces 5497 N of push force. The pull force on the retract stroke is 3681 N at 0.5 MPa, accounting for the 25 mm rod area.
Yes, if the original had PT ports and NBR seals. The built-in magnet (-S) does not affect mechanical mounting or port dimensions, but you gain the ability to add CMSG/DMSG sensors. Ensure the replacement matches the 100 mm bore, 60 mm stroke, and PT1/2 port thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X60SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.