Airtac SC100 Standard Cylinder SC100X610S
The AirTAC Airtac SC100 Standard Cylinder SC100X610S is a genuine double-acting standard air cylinder with a Ø100mm bore and 610mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke610 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X610S
The AirTAC SC100X610S is a double-acting single-rod pneumatic cylinder with a 100 mm bore and a 610 mm stroke, delivering a push force of 3927 N at 0.5 MPa (up to 7068 N at 0.9 MPa). Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide smooth deceleration for medium-to-heavy linear motion tasks.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to be clamped directly onto the tie-rod barrel for reliable end-of-stroke detection. The total extended body length is approximately 798 mm, making it a compact choice for applications needing a genuine AirTAC actuator with integrated position sensing.
Airtac SC100 Standard Cylinder SC100X610S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X610S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 610 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X610S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×610 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X610S Is Used
Pallet Stop & Lift Gates
The 3927 N push force at 0.5 MPa easily raises or stops heavy pallets on conveyor lines, with the built-in magnet providing sensor feedback to the PLC for precise sequencing.
Clamping & Assembly Fixtures
Ideal for pneumatic clamping in welding or assembly jigs where the 610 mm stroke provides ample reach and the adjustable cushion prevents impact damage to tooling.
Baler & Compactor Ejection
Delivers the high force needed to eject compacted material from balers or compactors, with the -S magnet enabling reliable end-of-stroke confirmation in dusty environments.
Is the Airtac SC100 Standard Cylinder SC100X610S the Right Cylinder?
Choose the SC100 bore when your application requires around 3927 N of push force at standard 0.5 MPa shop air. If you can work with roughly 2513 N, stepping down to an SC80 reduces weight and air consumption. For higher force demands near 6136 N, the SC125 is the next logical step-up.
For this 610 mm stroke, ensure the load is guided and side forces are eliminated; a long unsupported 25 mm rod can bend under lateral loads. When replacing an existing cylinder, match five points: 100 mm bore, 610 mm stroke, PT port thread, the built-in magnet (-S), and the basic mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X610S FAQ
At 0.5 MPa the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix indicates a built-in magnet in the piston, so AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors can be clamped directly onto the tie-rod barrel for contactless position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X610S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.