Airtac SC100 Standard Cylinder SC100X64
The AirTAC Airtac SC100 Standard Cylinder SC100X64 is a genuine double-acting standard air cylinder with a Ø100mm bore and 64mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke64 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X64
The AirTAC SC100X64 is a double-acting tie-rod cylinder delivering a robust 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa), making it suitable for medium-stroke clamping and pressing tasks. Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide smooth deceleration, while the compact 188 mm body length keeps the overall footprint manageable.
This 100 mm bore cylinder uses PT1/2 ports and operates on filtered air from 0.15 to 1.0 MPa. The standard TPU seals offer a working range of -20 to +70 °C. With a 64 mm stroke, it fits neatly into fixtures requiring a short, powerful linear push without the bulk of a longer-stroke unit.
Airtac SC100 Standard Cylinder SC100X64 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X64 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 64 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X64
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×64 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X64 Is Used
Pneumatic Press
Generates 3927 N at 0.5 MPa for short-stroke pressing, staking, or assembly operations where a compact cylinder footprint is required.
Part Clamping
The 64 mm stroke provides a quick, powerful clamp action for holding workpieces on conveyor pallets or machining fixtures.
Gate Actuation
Operates small diverter gates or chutes in material handling lines, using the 25 mm rod's rigidity for direct linear actuation.
Is the Airtac SC100 Standard Cylinder SC100X64 the Right Cylinder?
For applications needing slightly less force, the 80 mm bore SC80 series provides 2513 N at 0.5 MPa, while the 125 mm bore SC125 steps up to 6136 N. This SC100X64 is a basic configuration with no magnet, standard TPU seals, and PT port threads. When replacing an existing cylinder, match all five key points: 100 mm bore, 64 mm stroke, PT1/2 port thread, basic (no mounting accessory), and no built-in magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X64 FAQ
At 0.5 MPa the push force is 3927 N, and at the maximum operating pressure of 0.9 MPa it reaches 7068 N. The theoretical pull force at 0.5 MPa is 3681 N, accounting for the 25 mm rod area.
No. The AirTAC SC series is a tie-rod cylinder and is shorter than an ISO 15552 cylinder of the same bore and stroke, so it is not dimensionally interchangeable. Replace only with another AirTAC SC100 cylinder matching the 64 mm stroke, PT1/2 ports, and basic mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X64
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.