Airtac SC100 Standard Cylinder SC100X65S
The AirTAC Airtac SC100 Standard Cylinder SC100X65S is a genuine double-acting standard air cylinder with a Ø100mm bore and 65mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke65 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X65S
The AirTAC SC100X65S is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and 7068 N at the maximum operating pressure of 0.9 MPa. With a 65 mm stroke, it is ideal for short, powerful linear actuation tasks in compact machinery.
This model includes the built-in magnet suffix, allowing easy integration of CMSG, DMSG, or EMSG reed and solid-state sensors directly on the 100 mm bore barrel. The standard PT1/2 port and 25 mm diameter piston rod provide robust flow and mechanical strength for industrial applications.
Airtac SC100 Standard Cylinder SC100X65S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X65S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X65S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X65S Is Used
End-of-Stroke Sensing
The integrated magnet allows precise position feedback via clamp-on sensors, perfect for automated sequences requiring confirmation of clamp or eject operations.
Material Handling
Generates 3927 N of push force at standard shop air, suitable for diverting or lifting heavy items on short-stroke transfer lines.
Press & Clamp Fixtures
Delivers a controlled 7068 N clamping force at 0.9 MPa, ideal for holding workpieces during machining or assembly processes.
Is the Airtac SC100 Standard Cylinder SC100X65S the Right Cylinder?
For applications requiring slightly less force, consider the SC80 series which provides 2513 N at 0.5 MPa. If your load demands exceed the 3927 N output, stepping up to the SC125 bore offers 6136 N at the same pressure. When replacing this cylinder, ensure the replacement matches the 100 mm bore, 65 mm stroke, PT1/2 port thread, and the magnetic piston option to maintain sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X65S FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
Yes, the -S suffix indicates a built-in magnet. You can mount CMSG, DMSG, or EMSG series reed or solid-state sensors directly onto the cylinder barrel for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X65S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.