Airtac SC100 Standard Cylinder SC100X665S
The AirTAC Airtac SC100 Standard Cylinder SC100X665S is a genuine double-acting standard air cylinder with a Ø100mm bore and 665mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke665 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X665S
The SC100X665S is a double-acting pneumatic cylinder with a 100 mm bore and a 665 mm stroke, delivering a substantial push force of 3927 N at 0.5 MPa (7068 N at the maximum operating pressure of 0.9 MPa). Its 25 mm diameter piston rod and PT1/2 ports support high-flow applications, while the 29 mm adjustable air cushion at each end decelerates the piston smoothly to protect the end caps.
This model includes a factory-installed -S magnet embedded in the piston, allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the tie-rod barrel for non-contact position sensing. The standard TPU seals provide a reliable operating range of -20 to +70 °C, making this a versatile workhorse for general industrial automation tasks.
Airtac SC100 Standard Cylinder SC100X665S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X665S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 665 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X665S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×665 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X665S Is Used
Pallet Stop & Transfer
The 3927 N push force at 0.5 MPa and 665 mm stroke reliably stops and repositions heavy pallets on wide conveyor lines, with the built-in magnet providing end-of-stroke confirmation.
Heavy Press Guard Door
Operates a large safety guard door on a heavy stamping press. The adjustable cushion ensures quiet, low-impact operation, and the magnetic piston enables door-closed verification via barrel-mounted sensors.
Baler or Compactor Eject
Provides the high force needed to eject compacted material from an industrial baler. The long 665 mm stroke pushes the finished bale fully onto an outfeed conveyor.
Is the Airtac SC100 Standard Cylinder SC100X665S the Right Cylinder?
For applications requiring slightly lower force, consider stepping down to an 80 mm bore (2513 N at 0.5 MPa), while higher-force needs may require the 125 mm bore (6136 N at 0.5 MPa). With a 665 mm stroke, ensure the rod is not subjected to significant side loading; if lateral forces are present, an external linear guide or a guided cylinder should be used to prevent rod bending and premature bearing wear. When replacing an existing unit, match five key points: 100 mm bore, 665 mm stroke, PT port thread, the built-in magnet (-S), and the basic mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X665S FAQ
At the standard 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
Yes. The -S suffix in the model code SC100X665S indicates a built-in magnet in the piston. This allows you to clamp compatible AirTAC CMSG, DMSG, or EMSG sensors directly onto the cylinder's tie-rod barrel to detect piston position without additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X665S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.