Airtac SC100 Standard Cylinder SC100X700S
The AirTAC Airtac SC100 Standard Cylinder SC100X700S is a genuine double-acting standard air cylinder with a Ø100mm bore and 700mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke700 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X700S
The SC100X700S is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 100 mm bore with a 700 mm stroke and a built-in magnet for sensor mounting. It generates a push force of 3927 N at 0.5 MPa and can reach 7068 N at the maximum operating pressure of 0.9 MPa, placing it in the 800-kgf class at theoretical 1.0 MPa force.
This model features a 25 mm diameter piston rod with an M20x1.5 male thread, PT1/2 port connections, and a 29 mm adjustable air cushion at each end to decelerate the piston smoothly. The total body length A is 188 mm, giving an approximate extended length of 888 mm. The integrated magnet allows CMSG, DMSG, or EMSG sensors to be clamped directly onto the barrel for non-contact position sensing.
Airtac SC100 Standard Cylinder SC100X700S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X700S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X700S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X700S Is Used
Pallet Transfer Systems
The 700 mm stroke and 3927 N push force at 0.5 MPa reliably transfer heavy pallets between conveyor lanes. The built-in magnet enables end-of-stroke sensing to coordinate with upstream automation.
Heavy Part Clamping
Ideal for clamping large weldments or castings in machining fixtures. The adjustable cushion absorbs impact at the end of the 700 mm stroke, protecting the fixture from vibration.
Bulk Bag Filling Stations
Actuates a discharge gate or densification table with 7068 N of force at 0.9 MPa. The magnetic piston allows sensors to confirm full-open and full-closed positions for batch control.
Is the Airtac SC100 Standard Cylinder SC100X700S the Right Cylinder?
Select the SC100 bore when your application requires a push force around 3927 N at 0.5 MPa. If your load is closer to 2513 N, stepping down to an SC80 bore can reduce air consumption and physical size. For strokes of 700 mm, always check for potential side loading on the 25 mm rod; an external linear guide or a guided cylinder is recommended to prevent rod bending and premature bearing wear.
When replacing an existing cylinder, match five key points: 100 mm bore, 700 mm stroke, PT1/2 port thread, the basic mounting configuration (no integral bracket), and the -S magnet option for sensor compatibility. This SC cylinder is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X700S FAQ
The theoretical push force is 3927 N at 0.5 MPa, 5497 N at 0.7 MPa, and 7068 N at the maximum operating pressure of 0.9 MPa. The pull force on the retract stroke is slightly lower due to the rod area: 3681 N at 0.5 MPa. Always apply a safety factor for real-world dynamic loads.
Yes. The -S suffix in the model code indicates a built-in magnetic piston. You can clamp compatible AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel tie-rods to detect piston position without any additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X700S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.