Airtac SC100 Standard Cylinder SC100X700SCB
The AirTAC Airtac SC100 Standard Cylinder SC100X700SCB is a genuine double-acting standard air cylinder with a Ø100mm bore and 700mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke700 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X700SCB
The SC100X700SCB is a robust double-acting tie-rod cylinder delivering a substantial 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide smooth deceleration for heavy loads moving through a 700 mm stroke.
This configuration includes a built-in magnet for direct mounting of CMSG/DMSG/EMSG sensors, enabling precise end-of-stroke detection. The rear double clevis mount (F-SC100CB) allows the cylinder to pivot during operation, making it ideal for articulated machinery. It is a genuine AirTAC product, ready for immediate integration.
Airtac SC100 Standard Cylinder SC100X700SCB Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X700SCB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X700SCB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X700SCB Is Used
Heavy Part Transfer
Moves large fabricated metal parts or heavy pallets along a conveyor line, using the clevis mount for smooth pivoting action during lift-and-shift sequences.
Industrial Press Feed
Provides the high push force needed to feed heavy stock into a stamping press or forming machine, with magnetic sensors confirming each advance cycle.
Log Splitter Actuation
Drives the wedge in a hydraulic-free log splitter, leveraging 3927 N of force at standard shop air pressure for efficient wood processing.
Is the Airtac SC100 Standard Cylinder SC100X700SCB the Right Cylinder?
For applications requiring a 700 mm stroke, the SC100X700SCB provides a high force output suitable for pressing or heavy clamping. If your load requires slightly less force, consider stepping down to the 80 mm bore (2513 N at 0.5 MPa) to reduce air consumption. For strokes of this length, ensure the rod is protected from significant side loads; an external linear guide is recommended to prevent rod bending and premature seal wear. When replacing an existing unit, match the 100 mm bore, 700 mm stroke, PT port thread, rear double clevis mounting, and the integrated magnet sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X700SCB FAQ
At the standard 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. The maximum theoretical force at 1.0 MPa is 801 kgf, with a working push force of 7068 N at 0.9 MPa.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than a typical ISO 15552 profile cylinder, so it is not dimensionally interchangeable. For a correct replacement, match the SC series, 100 mm bore, 700 mm stroke, PT ports, CB clevis mount, and the integrated magnet option.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X700SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.