Airtac SC100 Standard Cylinder SC100X700SFB
The AirTAC Airtac SC100 Standard Cylinder SC100X700SFB is a genuine double-acting standard air cylinder with a Ø100mm bore and 700mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke700 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X700SFB
The AirTAC SC100X700SFB is a double-acting single-rod pneumatic cylinder delivering 3927 N push force at 0.5 MPa and up to 7068 N at 0.9 MPa. With a 100 mm bore, 25 mm rod, and a 700 mm stroke, this model is built for demanding linear actuation where substantial force and mid-range travel are required.
This configuration includes a built-in magnet (-S) for mounting CMSG/DMSG/EMSG sensors directly on the tie-rod barrel, plus an FB rear rectangular flange (F-SC100FB) for secure cap-end mounting. The 29 mm adjustable air cushion decelerates the piston smoothly, protecting end caps during high-cycle operation. Ports are PT1/2, and the rod thread is M20x1.5.
Airtac SC100 Standard Cylinder SC100X700SFB Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X700SFB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X700SFB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X700SFB Is Used
Pallet Transfer
The 700 mm stroke and 3927 N push force reliably shift heavy pallets between conveyor lanes in automated logistics hubs.
Press-Fit Assembly
Delivers up to 7068 N at 0.9 MPa for pressing bearings or bushings into housings on assembly lines, with sensor confirmation of full stroke.
Baler & Compactor Ejection
Ejects compacted material bales from large industrial balers, using the long 700 mm travel and high force for complete clearing.
Is the Airtac SC100 Standard Cylinder SC100X700SFB the Right Cylinder?
For higher force, step up to the SC125 (6136 N at 0.5 MPa); for lower force, the SC80 provides 2513 N. At 700 mm stroke, the 25 mm rod is robust, but avoid direct side loading—external linear guides are recommended to prevent rod bending and premature bearing wear. This cylinder is a direct replacement for any AirTAC SC100X700 with the same FB flange, -S magnet, and PT ports. Ensure the replacement matches bore, stroke, port thread, mounting accessory, and magnet option exactly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X700SFB FAQ
At 0.5 MPa, push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix denotes a built-in magnet on the piston, making it compatible with AirTAC CMSG, DMSG, and EMSG reed or solid-state sensors that clamp directly onto the tie-rod barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X700SFB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.