Airtac SC100 Standard Cylinder SC100X700SLB
The AirTAC Airtac SC100 Standard Cylinder SC100X700SLB is a genuine double-acting standard air cylinder with a Ø100mm bore and 700mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke700 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X700SLB
The SC100X700SLB is a double-acting tie-rod cylinder delivering a substantial 3927 N push force at 0.5 MPa, scaling up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 700 mm stroke and a 25 mm diameter piston rod, this model is well-suited for long linear movements in material handling and heavy-duty clamping fixtures.
This specific configuration includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, and an LB foot mount (F-SC100LB) for secure axial surface mounting. The 100 mm bore features PT1/2 ports and a 29 mm adjustable air cushion, ensuring smooth deceleration at the end of each stroke.
Airtac SC100 Standard Cylinder SC100X700SLB Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X700SLB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X700SLB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X700SLB Is Used
Conveyor Diverter Gates
The 700 mm stroke and high push force at 0.5 MPa reliably actuate long-throw diverter gates, sorting packages or materials between conveyor lanes.
Heavy-Part Clamping & Welding
Delivers 7068 N of clamping force at 0.9 MPa for securing large fabrications. The LB foot mount provides a rigid base, and the magnetic piston enables end-of-stroke confirmation.
Pallet Lift & Transfer
With a 25 mm rod and 3927 N of push force, this cylinder can lift and transfer heavy pallets in a low-headroom automated storage system, using the LB mount for direct floor or frame attachment.
Is the Airtac SC100 Standard Cylinder SC100X700SLB the Right Cylinder?
For applications requiring slightly less force, stepping down to an 80 mm bore (2513 N at 0.5 MPa) can reduce air consumption. For higher demands, the 125 mm bore provides 6136 N. With a 700 mm stroke, ensure the rod is protected from side loads; an external guide or a guided cylinder is recommended to prevent rod bending and premature bearing wear. For a direct replacement, match the 100 mm bore, 700 mm stroke, PT port thread, LB foot mount, and the integrated magnet (-S) option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X700SLB FAQ
At 0.7 MPa operating pressure, the theoretical push force is 5497 N. The pull force on the retract stroke is 3681 N at 0.5 MPa, due to the area reduction from the 25 mm piston rod.
To ensure a drop-in replacement, verify five key points: the bore (100 mm), stroke (700 mm), port thread type (PT), mounting style (LB foot mount with bracket F-SC100LB), and the presence of a magnetic piston (-S) for sensors. This is a tie-rod cylinder and is dimensionally shorter than an ISO 15552 profile cylinder, so it is not a direct swap for that standard.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X700SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.