Airtac SC100 Standard Cylinder SC100X700TC
The AirTAC Airtac SC100 Standard Cylinder SC100X700TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 700mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke700 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X700TC
The SC100X700TC is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and a 700 mm stroke, this tie-rod cylinder uses a 25 mm diameter piston rod and M20x1.5 rod thread, making it a robust linear actuator for mid-range industrial tasks.
This model is factory-configured with a TC centre trunnion mount, supplied complete with the TCM1 bracket (F-SC100TC), allowing the cylinder to pivot and absorb angular misalignment during operation. The adjustable air cushion at each end is 29 mm long, providing smooth deceleration for the moving mass, while the standard PT1/2 ports ensure straightforward pneumatic connections.
Airtac SC100 Standard Cylinder SC100X700TC Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X700TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X700TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X700TC Is Used
Conveyor Diverter Gates
The 700 mm stroke and 3927 N push force at 0.5 MPa allow this cylinder to operate diverter gates on wide conveyor lines, reliably redirecting packages or bulk materials between chutes.
Heavy Component Clamping
Ideal for welding and assembly fixtures, the SC100X700TC applies substantial clamping force to hold large fabrications or castings securely during machining or joining processes.
Pivoting Press Actuators
The integrated centre trunnion mount enables the cylinder to swing freely, making it a direct fit for toggle presses and lever-actuated mechanisms that require a long working stroke.
Is the Airtac SC100 Standard Cylinder SC100X700TC the Right Cylinder?
Choose the SC100 when your application needs around 3927 N of push force at 0.5 MPa; if you require less force, the SC80 bore provides 2513 N at the same pressure. For higher force demands, the SC125 delivers 6136 N at 0.5 MPa. Always match replacement cylinders on five points: 100 mm bore, 700 mm stroke, PT port thread, TC centre trunnion mounting, and the absence of a magnet.
At 700 mm stroke, the piston rod extends significantly. Avoid direct side loading on the rod end; if the load is not perfectly guided, use an external linear guide or consider a guided cylinder variant to prevent rod bending and premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X700TC FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 cylinder, so the mounting dimensions are not interchangeable. This TC trunnion-mounted unit should only replace another AirTAC SC100 of the same stroke and mounting configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X700TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.