Airtac SC100 Standard Cylinder SC100X710S
The AirTAC Airtac SC100 Standard Cylinder SC100X710S is a genuine double-acting standard air cylinder with a Ø100mm bore and 710mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke710 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X710S
The SC100X710S is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa. Its 100 mm bore and 710 mm stroke suit medium-to-heavy linear actuation tasks where consistent force is required.
This model includes a built-in magnet, allowing CMSG, DMSG, or EMSG sensors to mount directly on the tie-rod barrel for reliable end-of-stroke or mid-stroke position sensing. The 25 mm diameter piston rod and 29 mm adjustable air cushion provide smooth deceleration, while the PT1/2 port ensures straightforward pneumatic connection.
Airtac SC100 Standard Cylinder SC100X710S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X710S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 710 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X710S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×710 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X710S Is Used
Conveyor Diverter Gates
The 710 mm stroke provides ample reach for diverting medium-weight packages or materials on wide conveyor lines, with sensor confirmation of gate position.
Heavy Part Clamping
Delivers 7068 N of clamping force at 0.9 MPa for securing large fabrications or castings during machining or welding, with magnetic piston sensing for cycle interlock.
Pallet Lift & Transfer
Ideal for lifting and transferring pallets in automated storage systems, where the built-in magnet provides precise position feedback to the control system.
Is the Airtac SC100 Standard Cylinder SC100X710S the Right Cylinder?
For applications needing more force, stepping up to the SC125 series provides 6136 N of push at 0.5 MPa. If a shorter, more compact cylinder is acceptable, the SC80 series offers 2513 N at the same pressure. With a 710 mm stroke, ensure the rod is supported against side loads; consider an external linear guide if the load is not perfectly axial to prevent rod bending and premature seal wear. To match this cylinder for replacement, confirm the 100 mm bore, 710 mm stroke, PT1/2 port thread, built-in magnet (-S suffix), and basic mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X710S FAQ
At the standard operating pressure of 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
Yes. The -S suffix in the model code SC100X710S designates a built-in magnet on the piston. This allows AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors to be clamped directly onto the cylinder's tie-rod barrel for contactless position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X710S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.