Airtac SC100 Standard Cylinder SC100X710SH
The AirTAC Airtac SC100 Standard Cylinder SC100X710SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 710mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke710 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X710SH
The AirTAC SC100X710SH is a double-acting tie-rod cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa. Its 100 mm bore and 710 mm stroke suit mid-to-long linear movements in hot environments, thanks to the Viton (FKM) seal option that extends the operating temperature range to 0–150 °C.
This model includes a built-in magnet (-S suffix), allowing CMSG/DMSG/EMSG reed or solid-state sensors to clamp directly onto the barrel for contactless position sensing. The piston rod is 25 mm diameter with an M20x1.5 thread, and the adjustable air cushion (29 mm length) decelerates the piston smoothly at stroke ends. Ports are PT1/2, and the total extended body length is approximately 898 mm.
Airtac SC100 Standard Cylinder SC100X710SH Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X710SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 710 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X710SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×710 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X710SH Is Used
Foundry & Heat Treatment
The Viton seals withstand ambient temperatures up to 150 °C, making this cylinder suitable for actuating dampers, clamps, or pushers near furnaces and ovens.
Hot Press & Molding
Delivers 3927 N of force at standard plant pressure for closing heated molds or presses, with sensor-ready position feedback for automated cycle control.
High-Temperature Material Handling
Operates reliably in hot zones to push or lift products onto conveyors, where standard seals would degrade, and the 710 mm stroke covers extended transfer distances.
Is the Airtac SC100 Standard Cylinder SC100X710SH the Right Cylinder?
For applications requiring less force, the 80 mm bore SC80 series provides 2513 N at 0.5 MPa, while the 125 mm bore steps up to 6136 N. With a 710 mm stroke, ensure the rod is not subjected to high side loads; if the load is not guided externally, consider adding an external guide rail or switching to a guided cylinder to prevent rod bending and premature bearing wear. To match this cylinder in a replacement, confirm five points: 100 mm bore, 710 mm stroke, PT1/2 port thread, the built-in magnet for sensors, and the Viton seal material for high-temperature compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X710SH FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC100X710SH is a double-acting cylinder and will drift or drop if pressure is lost or the directional valve is centered. For load holding without live pressure, you must add an external rod brake, a mechanical lock, or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X710SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.