Airtac SC100 Standard Cylinder SC100X710STC
The AirTAC Airtac SC100 Standard Cylinder SC100X710STC is a genuine double-acting standard air cylinder with a Ø100mm bore and 710mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke710 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X710STC
The AirTAC SC100X710STC is a double-acting tie-rod cylinder delivering 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa). Its 100 mm bore and 710 mm stroke suit medium-to-long linear moves in clamping, pressing, and material-handling stations. The built-in magnet allows CMSG/DMSG/EMSG sensors to clamp directly onto the barrel for rod-position feedback.
This model ships with the TC centre trunnion mount and TCM1 bracket (F-SC100TC), letting the cylinder pivot during the stroke to follow an arc without binding. The 25 mm diameter piston rod and 29 mm air cushion at each end help decelerate the load smoothly. Operating pressure is 0.15–1.0 MPa with TPU seals rated for -20 to +70 °C.
Airtac SC100 Standard Cylinder SC100X710STC Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X710STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 710 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X710STC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×710 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X710STC Is Used
Pallet Stop & Lift
The 710 mm stroke pushes or lifts pallets on roller conveyors. The centre trunnion mount lets the cylinder pivot as the lift table rises, and the magnetic piston confirms end-of-stroke with barrel-mounted sensors.
Panel Press & Clamp
With 7068 N of force at 0.9 MPa, this cylinder applies steady clamping pressure on large panels during gluing or welding. The adjustable air cushion protects the tooling from hard end-of-stroke impacts.
Baler & Compactor Gate
Operates a discharge gate on a recycling baler. The 100 mm bore provides the push needed to slide a heavy gate, while the trunnion mount absorbs misalignment as the gate travels through its 710 mm arc.
Is the Airtac SC100 Standard Cylinder SC100X710STC the Right Cylinder?
Choose the SC100 bore when your application needs around 3927 N at 0.5 MPa. If the load is lighter, stepping down to an SC80 bore (2513 N at 0.5 MPa) can reduce air consumption and overall width. For heavier loads, the SC125 bore provides 6136 N at the same pressure. At 710 mm stroke, the rod extends well beyond the body length (A=188 mm) to a total extended length of approximately 898 mm — confirm side-load limits and consider an external guide or guided cylinder if the rod tip sees any off-axis force.
For replacement, match five points: 100 mm bore, 710 mm stroke, PT port thread, TC centre trunnion mount with TCM1 bracket, and the -S magnet. This SC tie-rod cylinder is shorter than an ISO 15552 cylinder and is not dimensionally interchangeable with that profile.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X710STC FAQ
At 0.5 MPa the cylinder pushes with 3927 N. At 0.7 MPa it delivers 5497 N, and at the maximum operating pressure of 0.9 MPa it reaches 7068 N. Pull force (retract) is slightly lower due to the rod area: 3681 N at 0.5 MPa.
Not directly. The SC is a tie-rod cylinder that is shorter overall than an ISO 15552 cylinder of the same bore and stroke, so mounting centres and body length differ. Match bore, stroke, PT ports, TC trunnion mount, and the -S magnet when replacing another AirTAC SC100.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X710STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.