Airtac SC100 Standard Cylinder SC100X750S
The AirTAC Airtac SC100 Standard Cylinder SC100X750S is a genuine double-acting standard air cylinder with a Ø100mm bore and 750mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke750 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X750S
The SC100X750S is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 100 mm bore with a 750 mm stroke and a factory-installed magnet for sensor feedback. At 0.5 MPa air pressure it generates 3927 N of push force, and at the maximum operating pressure of 0.9 MPa the thrust reaches 7068 N, making it a powerful actuator for mid-range industrial automation tasks.
This model features a 25 mm diameter piston rod with M20x1.5 male threads and PT1/2 port connections. The total extended body length is approximately 938 mm (188 mm body length A + 750 mm stroke). The built-in magnet, designated by the -S suffix, allows CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the tie-rod barrel for precise, non-contact position sensing.
Airtac SC100 Standard Cylinder SC100X750S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X750S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X750S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X750S Is Used
Pallet Stop & Lift Gates
The 3927 N push force at 0.5 MPa is ideal for raising heavy pallet stops or lift gates in conveyor systems, with the magnetic piston enabling end-of-stroke confirmation.
Heavy Part Clamping
Applies up to 7068 N of clamping force at 0.9 MPa for securing large weldments or castings in machining fixtures, with sensor feedback ensuring the clamp is fully engaged before the cycle starts.
Baler & Compactor Ejection
The 750 mm stroke provides the linear travel needed to eject compacted bales of cardboard or waste material, with the robust 25 mm rod handling the repetitive push cycles.
Is the Airtac SC100 Standard Cylinder SC100X750S the Right Cylinder?
Choose the SC100 bore when your application needs between roughly 3900 N and 7100 N of force from standard plant air. If your load is lighter, stepping down to an SC80 bore saves air consumption and space (2513 N push at 0.5 MPa). For higher force requirements, the SC125 bore provides 6136 N at the same 0.5 MPa pressure. This 750 mm stroke is well within the 1500 mm maximum standard stroke for the 100 mm bore.
For a 750 mm stroke, always evaluate side-loading conditions. A long, unsupported 25 mm rod can experience bending under lateral forces. Use an external linear guide or a guided cylinder assembly to protect the rod bearing and piston seals from premature wear. When replacing an existing cylinder, match five points: 100 mm bore, 750 mm stroke, PT1/2 ports, the built-in magnet (-S), and the basic (no bracket) mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X750S FAQ
At 0.5 MPa (approximately 73 psi), the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
Yes. The -S suffix in the model code SC100X750S indicates a built-in magnetic piston. This allows you to clamp AirTAC CMSG, DMSG, or EMSG series reed and solid-state sensors directly onto the cylinder's tie-rod barrel without any additional brackets or modifications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X750S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.