Airtac SC100 Standard Cylinder SC100X750STC
The AirTAC Airtac SC100 Standard Cylinder SC100X750STC is a genuine double-acting standard air cylinder with a Ø100mm bore and 750mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke750 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X750STC
The SC100X750STC is a double-acting pneumatic cylinder delivering a substantial 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). Its 100 mm bore and 750 mm stroke make it a robust linear actuator for medium-to-heavy industrial tasks, with a 25 mm diameter piston rod providing excellent rigidity for pushing and pulling loads.
This model is factory-configured with a built-in magnet (suffix -S) for direct mounting of CMSG/DMSG/EMSG sensors, and a centre trunnion mount (suffix -TC) including the TCM1 bracket (F-SC100TC). The trunnion allows the cylinder body to pivot, accommodating swinging loads and angular motion. The 29 mm adjustable air cushion at each end decelerates the piston smoothly, reducing end-of-stroke impact.
Airtac SC100 Standard Cylinder SC100X750STC Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X750STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X750STC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X750STC Is Used
Conveyor Diverters
The 3927 N push force at 0.5 MPa powerfully actuates heavy-duty diverter gates on wide conveyor systems, reliably sorting large packages or pallets.
Clamping & Fixturing
Provides strong, consistent clamping for large weldments or assemblies in jigs. The trunnion mount allows the cylinder to swing clear for easy part loading and unloading.
Material Lift Tables
Ideal for pivoting lift mechanisms on scissor lifts or tilt tables. The centre trunnion absorbs the angular change as the platform raises, while the 750 mm stroke provides a wide range of motion.
Is the Airtac SC100 Standard Cylinder SC100X750STC the Right Cylinder?
For applications requiring slightly less force, stepping down to an 80 mm bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For higher thrust demands, the 125 mm bore provides 6136 N at the same pressure. At a 750 mm stroke, ensure the rod is guided externally if significant side loads are present, as long, unsupported rods are susceptible to bending and bearing wear. When replacing an existing cylinder, match five key points: 100 mm bore, 750 mm stroke, PT port thread, centre trunnion (TC) mounting, and the integrated magnet (-S) for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X750STC FAQ
At the standard operating pressure of 0.5 MPa, the cylinder provides 3927 N extending and 3681 N retracting. The maximum force at the 0.9 MPa operating limit is 7068 N. The theoretical force at 1.0 MPa is 801 kgf, but this exceeds the rated operating pressure.
No. The SC100X750STC is a double-acting cylinder that requires continuous air pressure to maintain its position. If pressure is lost or the directional valve is centered, the piston will drift. For load holding, you must add an external pilot-operated check valve or a mechanical rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X750STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.