Airtac SC100 Standard Cylinder SC100X750TC
The AirTAC Airtac SC100 Standard Cylinder SC100X750TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 750mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke750 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X750TC
The AirTAC SC100X750TC is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and a 750 mm stroke, this model is built for medium-to-heavy linear actuation tasks, featuring a robust 25 mm diameter piston rod and an adjustable air cushion to decelerate the load smoothly at the end of travel.
This specific configuration includes a centre trunnion (TC) mount, supplied with the TCM1 bracket, allowing the cylinder to pivot as it strokes—ideal for swinging or articulating loads. The body length A is 188 mm, making the total extended length approximately 938 mm. It uses standard PT ports (PT1/2) and TPU seals for reliable operation in temperatures from -20 to +70 °C.
Airtac SC100 Standard Cylinder SC100X750TC Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X750TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X750TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X750TC Is Used
Conveyor Diverters
The pivoting action of the TC mount and the 3927 N push force at 0.5 MPa make this cylinder ideal for actuating heavy-duty gates or pushers on conveyor lines, smoothly redirecting pallets or packages.
Welding Fixture Clamping
Delivers a powerful 7068 N clamping force at 0.9 MPa for securing large fabrications in welding jigs. The centre trunnion allows the cylinder body to swing into position without binding.
Agricultural Equipment Actuation
With its high force output and robust tie-rod construction, this cylinder reliably operates chute controls or hopper doors on harvesters and spreaders, handling dusty conditions with standard TPU seals.
Is the Airtac SC100 Standard Cylinder SC100X750TC the Right Cylinder?
Select the SC100X750TC when your application requires a substantial push force in the 4000 N class at standard plant pressure. If your force requirement is lower, stepping down to an 80 mm bore reduces the push force to 2513 N at 0.5 MPa, saving energy and space. For higher demands, the 125 mm bore provides 6136 N. The 750 mm stroke is a standard length for this bore, but always ensure the load is guided to prevent side-load bending on the 25 mm rod.
For a correct replacement, match five key points: 100 mm bore, 750 mm stroke, PT1/2 port thread, centre trunnion (TC) mounting with the F-SC100TC bracket, and the absence of a built-in magnet. This cylinder is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X750TC FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
The TC suffix means this cylinder comes with a centre trunnion mount and TCM1 bracket for pivoting applications. If you need a rigid, fixed mount, you would select a different mounting option like a foot mount (LB) or flange (FA/FB). The trunnion is integral to the cylinder body and cannot be removed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X750TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.