Airtac SC100 Standard Cylinder SC100X75SN
The AirTAC Airtac SC100 Standard Cylinder SC100X75SN is a genuine double-acting standard air cylinder with a Ø100mm bore and 75mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke75 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X75SN
The SC100X75SN is a 100mm bore, 75mm stroke double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and 7068 N at the 0.9 MPa maximum operating pressure. Its 25 mm diameter rod and PT1/2 ports suit moderate-speed clamping and pressing tasks.
This model includes a built-in magnet for CMSG/DMSG/EMSG sensor mounting and NBR seals for standard nitrile compatibility. The tie-rod body measures 188 mm (A-length), extending to 263 mm at full stroke, with a 29 mm adjustable air cushion at each end.
Airtac SC100 Standard Cylinder SC100X75SN Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X75SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X75SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X75SN Is Used
Heavy Clamping
Delivers up to 7068 N at 0.9 MPa for secure workpiece holding in machining fixtures and assembly jigs.
Material Stops
The 75 mm stroke and high force stop and position heavy pallets or components on conveyor lines.
Press Tool Actuation
Suited for small pneumatic presses requiring consistent force and end-of-stroke position sensing via the built-in magnet.
Is the Airtac SC100 Standard Cylinder SC100X75SN the Right Cylinder?
For a 75 mm stroke, the SC100 provides a compact yet powerful option. If you need more force, step up to the SC125 (6136 N at 0.5 MPa); for a lighter, faster cycle, the SC80 offers 2513 N. When replacing, match the 100 mm bore, 75 mm stroke, PT1/4 port, and ensure the -S magnet option is present for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X75SN FAQ
At 0.5 MPa (5 bar), the push force is 3927 N. At the maximum operating pressure of 0.9 MPa, it reaches 7068 N. The theoretical force at 1.0 MPa is 801 kgf.
Yes, the -S suffix indicates a built-in magnet, allowing direct mounting of AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors on the tie-rod barrel for piston position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X75SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.