Airtac SC100 Standard Cylinder SC100X760
The AirTAC Airtac SC100 Standard Cylinder SC100X760 is a genuine double-acting standard air cylinder with a Ø100mm bore and 760mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke760 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X760
The AirTAC SC100X760 is a double-acting tie-rod cylinder delivering a substantial 3927 N of push force at 0.5 MPa, scaling up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 760 mm stroke and a 25 mm diameter piston rod, this model is built for applications that need to move heavy payloads over a long linear distance.
This cylinder features a body length A of 188 mm, resulting in a total extended length of approximately 948 mm. It includes adjustable pneumatic cushioning at both ends with a 29 mm cushion length to decelerate the piston smoothly. The standard PT1/2 port thread ensures a direct fit for common pneumatic fittings.
Airtac SC100 Standard Cylinder SC100X760 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X760 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 760 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X760
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×760 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X760 Is Used
Pallet Transfer
Moves heavy pallets across a 760 mm span in a conveyor transfer station, using the high push force at standard plant pressure.
Press-Fit Assembly
Provides the controlled 7000 N+ thrust at 0.9 MPa needed to press bearings or bushings into large housings on an assembly line.
Baler Compaction
Drives the compaction plate in a recycling baler, requiring the long 760 mm stroke and robust force to compress materials into dense bales.
Is the Airtac SC100 Standard Cylinder SC100X760 the Right Cylinder?
For a step down in force, the SC80 bore provides 2513 N at 0.5 MPa, while stepping up to the SC125 bore offers 6136 N. For this 760 mm stroke, the long, unsupported 25 mm rod is susceptible to bending under side loads; an external linear guide or a guided cylinder configuration is strongly recommended to protect the rod bearing and seals. When replacing an existing unit, ensure an exact match across five points: 100 mm bore, 760 mm stroke, PT port thread, basic mounting (no accessory brackets), and no built-in magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X760 FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The SC100X760 is a standard double-acting cylinder and will not hold its position if air pressure is exhausted or lost. The piston will drift or drop under load. For load-holding, you must add an external mechanical lock, a rod brake, or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X760
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.