Airtac SC100 Standard Cylinder SC100X760S
The AirTAC Airtac SC100 Standard Cylinder SC100X760S is a genuine double-acting standard air cylinder with a Ø100mm bore and 760mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke760 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X760S
The AirTAC SC100X760S is a double-acting tie-rod cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa, making it a robust linear actuator for medium-to-heavy automation tasks. Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide smooth deceleration at end-of-stroke, while the body length A of 188 mm keeps the footprint compact for a 100 mm bore cylinder.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to be clamped directly onto the barrel for reliable, non-contact position sensing. The 760 mm stroke is within the 1500 mm maximum standard stroke for this bore, and the cylinder operates on filtered air from 0.15 to 1.0 MPa with PT1/2 ports.
Airtac SC100 Standard Cylinder SC100X760S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X760S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 760 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X760S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×760 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X760S Is Used
Material Handling Gates
The 760 mm stroke and 3927 N push force at 0.5 MPa suit diverters or gates on wide conveyors, with the built-in magnet enabling end-of-travel confirmation via barrel-mounted sensors.
Press Feed Mechanisms
Delivers up to 7068 N at 0.9 MPa for advancing heavy stock into stamping or forming presses, where the adjustable cushion protects tooling from impact damage at high cycle rates.
Pallet Dispensers
The long 760 mm stroke is ideal for lifting or separating pallets in automated dispensers, with the magnet option providing precise mid-stroke and end-stroke position feedback.
Is the Airtac SC100 Standard Cylinder SC100X760S the Right Cylinder?
When selecting a cylinder for a 760 mm stroke, ensure the rod is adequately supported against side loads; long unsupported strokes can induce bending moments on the 25 mm rod. If the 3927 N push force at 0.5 MPa is insufficient, stepping up to the SC125 bore provides 6136 N at the same pressure. For a smaller footprint with lower force, the SC80 bore offers 2513 N at 0.5 MPa.
For direct replacement, match five key points: 100 mm bore, 760 mm stroke, PT1/2 port thread, the built-in magnet (-S) for sensor compatibility, and the basic mounting configuration. This cylinder is not an ISO 15552 profile; it is a tie-rod design and should only replace another AirTAC SC tie-rod cylinder with identical specifications.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X760S FAQ
At 0.7 MPa operating pressure, the SC100 bore generates 5497 N of push force and 3681 N of pull force. The maximum operating force at 0.9 MPa is 7068 N push.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 cylinder, so it is not dimensionally interchangeable. Replace only with another AirTAC SC tie-rod cylinder matching the 100 mm bore, 760 mm stroke, PT1/2 ports, and built-in magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X760S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.