Airtac SC100 Standard Cylinder SC100X762
The AirTAC Airtac SC100 Standard Cylinder SC100X762 is a genuine double-acting standard air cylinder with a Ø100mm bore and 762mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke762 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X762
The SC100X762 is a double-acting pneumatic cylinder built in AirTAC's tie-rod SC series, combining a 100 mm bore with a 762 mm stroke. At 0.5 MPa air pressure it generates 3927 N of push force and 3681 N on the pull stroke, rising to 7068 N push at the maximum operating pressure of 0.9 MPa. The 25 mm diameter piston rod and 29 mm air cushion at each end help manage deceleration of moderate moving masses.
This model uses the standard PT1/2 port thread and TPU seals rated for -20 to +70 °C. The body length A is 188 mm, giving an approximate extended length of 950 mm. The 762 mm stroke is within the 1500 mm maximum standard stroke for bore 100, so it is a standard-stroke configuration. The adjustable cushion lets you fine-tune end-of-stroke braking without external shock absorbers.
Airtac SC100 Standard Cylinder SC100X762 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X762 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 762 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X762
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×762 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X762 Is Used
Belt Conveyor Diverters
The 3927 N push force at 0.5 MPa drives heavy-duty diverter gates on wide belt conveyors, reliably sorting packages or bulk materials with a 762 mm stroke to span the full belt width.
Press-Fit Assembly Stations
Delivers up to 7068 N at 0.9 MPa for pressing bearings, bushings, or pins into housings. The 762 mm stroke accommodates deep fixtures and long tooling approaches in semi-automated assembly cells.
Pallet Layer Positioning
Moves a pallet layer stop or pusher plate across a 762 mm range in a palletising cell. The adjustable air cushion softens the stop impact, protecting the pallet and product layers from shock damage.
Is the Airtac SC100 Standard Cylinder SC100X762 the Right Cylinder?
Choose the SC100X762 when your application needs roughly 4000 N of push force at typical shop air. If your load is lighter, stepping down to an 80 mm bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For heavier work, the 125 mm bore delivers 6136 N at the same pressure.
At 762 mm stroke, the unsupported rod length is significant. Any side load or off-axis mounting will bend the 25 mm rod and wear the bearing prematurely. Use an external guide rail or rod-alignment coupler, or consider a guided cylinder if the load is not perfectly axial. When replacing, match five points: 100 mm bore, 762 mm stroke, PT1/2 ports, basic (no bracket) mounting, and no magnet. This ensures drop-in interchangeability with another AirTAC SC100 tie-rod cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X762 FAQ
At 0.5 MPa the cylinder pushes with 3927 N and pulls with 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf. All figures assume clean, filtered air at the specified pressure.
Only if the load is perfectly axial with no side forces. A 762 mm stroke on a 25 mm rod creates a long lever arm; any misalignment or side load will bend the rod and damage the bearing. For non-axial loads, add an external guide rail or select a guided cylinder. The SC cylinder itself does not resist bending moments.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X762
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.