Airtac SC100 Standard Cylinder SC100X770S
The AirTAC Airtac SC100 Standard Cylinder SC100X770S is a genuine double-acting standard air cylinder with a Ø100mm bore and 770mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke770 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X770S
The AirTAC SC100X770S is a double-acting single-rod pneumatic cylinder delivering a push force of 3927 N at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and a 770 mm stroke, this tie-rod cylinder is built for medium-to-heavy linear actuation tasks where consistent thrust and sensor feedback are required.
The built-in magnet (-S suffix) allows direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors along the barrel for precise end-of-stroke or mid-stroke position detection. The 25 mm diameter rod and adjustable air cushion (29 mm length) help decelerate the piston smoothly, extending the service life of the cylinder and the machinery it drives.
Airtac SC100 Standard Cylinder SC100X770S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X770S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 770 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X770S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×770 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X770S Is Used
Material Handling & Sorting
The 770 mm stroke and 3927 N push force at 0.5 MPa are ideal for diverting packages or pushing heavy totes on wide conveyor lines. The built-in magnet enables sensor-based position confirmation for automated sortation logic.
Press & Clamping Fixtures
Delivers up to 7068 N of clamping force at 0.9 MPa for holding large workpieces during welding, assembly, or machining. The adjustable cushion protects the fixture from impact shock at the end of the 770 mm travel.
Palletising & Lift-Assist
Provides the long linear stroke needed for layer-forming or pallet dispenser pushers. The 25 mm rod is robust, but for off-axis loads in this stroke range, an external guide rail is recommended to protect the rod bearing.
Is the Airtac SC100 Standard Cylinder SC100X770S the Right Cylinder?
Select the SC100 bore when your application needs a push force around 3927 N at 0.5 MPa. If you can operate with roughly 2513 N, stepping down to an 80 mm bore reduces air consumption and physical size. For strokes of 300 mm or more, especially with this 770 mm extended length, ensure the rod is not subjected to side loads—consider an external guide or a guided cylinder to prevent rod bending and premature bearing wear.
When replacing an existing cylinder, match five key points: 100 mm bore, 770 mm stroke, PT1/2 port thread, the built-in magnet for sensor compatibility, and the basic mount configuration. The SC series is a tie-rod design, shorter than ISO 15552 cylinders, so it is not a drop-in replacement for ISO 15552 profiles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X770S FAQ
At the standard 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No, the SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 profile cylinder. It is not dimensionally interchangeable with ISO 15552. It can directly replace another AirTAC SC100 cylinder with the same bore, stroke, PT1/2 port, and magnet option, or a tie-rod cylinder with matching dimensions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X770S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.