Airtac SC100 Standard Cylinder SC100X800N
The AirTAC Airtac SC100 Standard Cylinder SC100X800N is a genuine double-acting standard air cylinder with a Ø100mm bore and 800mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke800 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X800N
The SC100X800N is a 100 mm bore, 800 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod family. At 0.5 MPa it delivers 3927 N push force and 3681 N pull force, rising to 7068 N push at 0.9 MPa — a 801 kgf class actuator suited to medium-heavy linear transfer and pressing tasks.
This model is built with NBR (nitrile) seals, making it a cost-effective choice for general industrial environments within the standard -20 to +70 °C range. The 25 mm diameter piston rod, 29 mm adjustable air cushion, and PT1/2 ports are standard for the 100 mm bore. With an 800 mm stroke the total extended body length reaches approximately 988 mm, so mounting and alignment should be checked for long-stroke stability.
Airtac SC100 Standard Cylinder SC100X800N Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X800N |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X800N
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X800N Is Used
Pallet Stop & Transfer
The 3927 N push force at 0.5 MPa reliably raises and lowers heavy pallet stops or transfers 800 mm across conveyor junctions in packaging and logistics lines.
Heavy Component Clamping
Delivers up to 7068 N of clamping thrust at 0.9 MPa for welding fixtures and assembly jigs, with an 800 mm stroke to accommodate large fabricated structures.
Bin & Hopper Gate Actuation
Operates slide gates on bulk material bins and hoppers with a long 800 mm travel, using the 25 mm rod and NBR seals for dusty, ambient-temperature environments.
Is the Airtac SC100 Standard Cylinder SC100X800N the Right Cylinder?
Choose the SC100 bore when your application needs roughly 3900 N of push force at typical shop air. If you can work with about 2500 N, stepping down to an SC80 bore saves space and weight; if you need over 6100 N, the SC125 bore is the next step up. For this 800 mm stroke, side-load management is critical — an unsupported 25 mm rod at full extension is vulnerable to bending under even light radial forces. Use an external linear guide or a guided-cylinder configuration to protect the rod bearing and seals.
When replacing an existing cylinder, match five points: 100 mm bore, 800 mm stroke, PT port thread, NBR seal material, and the basic (no bracket) mounting. The SC is a tie-rod cylinder, not an ISO 15552 profile type, so dimensional interchangeability is limited to other AirTAC SC100 tie-rod units or equivalent tie-rod designs with the same body length A of 188 mm.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X800N FAQ
At 0.7 MPa (7 bar) the SC100 bore generates 5497 N pushing force and 3681 N pulling force. The maximum operating force at 0.9 MPa is 7068 N push. These values assume standard filtered air and a stable supply pressure.
No. An 800 mm stroke with a 25 mm rod creates a long lever arm; even light side loads can bend the rod or damage the front bushing and seal. Always install an external linear guide, rod-alignment coupler, or switch to a guided cylinder when radial forces are present.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X800N
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.