Airtac SC100 Standard Cylinder SC100X80CA
The AirTAC Airtac SC100 Standard Cylinder SC100X80CA is a genuine double-acting standard air cylinder with a Ø100mm bore and 80mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke80 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X80CA
The SC100X80CA is a 100 mm bore double-acting pneumatic cylinder with an 80 mm stroke, delivering a robust push force of 3927 N at 0.5 MPa (7068 N at the 0.9 MPa maximum operating pressure). Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide reliable deceleration for mid-range linear tasks.
This model is configured with a CA rear single clevis mount (F-SC100CA), allowing the cylinder body to pivot during operation—ideal for applications where the load path is not perfectly linear. The standard PT1/2 port and TPU seals suit general industrial environments from -20 to +70 °C.
Airtac SC100 Standard Cylinder SC100X80CA Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X80CA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X80CA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X80CA Is Used
Clamping & Fixturing
The 3927 N force at 0.5 MPa securely holds heavy workpieces in CNC machining centres and welding jigs, with the clevis mount absorbing any slight misalignment.
Part Ejection & Sorting
Delivers a decisive 80 mm stroke to push or divert heavy packages and components off a conveyor line, with the rear pivot allowing a compact, swinging installation.
Press-Fit Assembly
Generates up to 7068 N of force at 0.9 MPa for pressing bearings, bushings, or pins into housings, where the short 80 mm stroke provides a compact power stroke.
Is the Airtac SC100 Standard Cylinder SC100X80CA the Right Cylinder?
With 3927 N of push force at 0.5 MPa, this 100 mm bore cylinder handles heavier clamping and pressing tasks that an 80 mm bore (2513 N) might struggle with. If your load is lighter, stepping down to the 80 mm bore saves air consumption and space. For replacement, match the 100 mm bore, 80 mm stroke, PT1/2 port thread, CA rear single clevis mount, and ensure the magnet option (-S) matches your sensor setup.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X80CA FAQ
At 0.5 MPa, push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Only if your existing cylinder also uses a rear single clevis (CA) mount. The SC is a tie-rod cylinder, not an ISO 15552 profile. You must match the 100 mm bore, 80 mm stroke, PT1/2 port, and CA mounting accessory (F-SC100CA) for a direct fit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X80CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.