Airtac SC100 Standard Cylinder SC100X80S
The AirTAC Airtac SC100 Standard Cylinder SC100X80S is a genuine double-acting standard air cylinder with a Ø100mm bore and 80mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke80 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X80S
The SC100X80S is a 100 mm bore double-acting tie-rod cylinder with a built-in magnet for barrel-mounted sensors. At 0.5 MPa it pushes with 3927 N and pulls with 3681 N, making it a strong mid-stroke actuator for clamping and pressing tasks.
The 80 mm stroke keeps the extended length compact at roughly 268 mm (body length A 188 mm + stroke). Its 25 mm diameter hard-chrome piston rod and 29 mm adjustable air cushion at each end provide smooth deceleration. The -S suffix equips this unit with a magnet, so CMSG/DMSG/EMSG reed or solid-state sensors clip directly onto the tie-rod barrel for reliable end-of-stroke detection.
Airtac SC100 Standard Cylinder SC100X80S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X80S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X80S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X80S Is Used
Clamping with Position Feedback
The built-in magnet and 3927 N clamping force at 0.5 MPa suit automated jigs where the control system must confirm the clamp has reached its extended or retracted position before the next cycle.
Conveyor Line Diverting
Use the SC100X80S to push product off a belt. The 80 mm stroke is enough for a clean divert action, and the magnetic piston lets you mount sensors to signal the diverter gate is clear.
Press-Fit Assembly
With 7068 N of push force available at 0.9 MPa, this cylinder can press bushings or bearings into housings. Sensor feedback confirms full insertion depth on every cycle.
Is the Airtac SC100 Standard Cylinder SC100X80S the Right Cylinder?
Choose the SC100X80S when you need a 100 mm bore with sensor feedback. If the 3927 N push at 0.5 MPa is more than you need, stepping down to an 80 mm bore (2513 N at 0.5 MPa) may reduce air consumption. For a drop-in replacement, match bore (100), stroke (80), PT port thread, the built-in magnet (-S), and the basic mounting style. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X80S FAQ
At 0.5 MPa the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa push reaches 5497 N, and at the maximum operating pressure of 0.9 MPa it delivers 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix means a magnet is built into the piston. You can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the tie-rod barrel to detect piston position without any additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.