Airtac SC100 Standard Cylinder SC100X80SLB
The AirTAC Airtac SC100 Standard Cylinder SC100X80SLB is a genuine double-acting standard air cylinder with a Ø100mm bore and 80mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke80 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X80SLB
The SC100X80SLB is a double-acting pneumatic cylinder delivering a substantial 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). With an 80 mm stroke, it is well-suited for compact clamping, pressing, and ejecting operations where a large force is required in a short linear travel.
This model includes a built-in magnet (-S suffix), allowing easy mounting of CMSG, DMSG, or EMSG sensors directly onto the tie-rod barrel for precise end-of-stroke detection. The LB foot mount provides a stable, surface-mounted installation using the F-SC100LB accessory bracket.
Airtac SC100 Standard Cylinder SC100X80SLB Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X80SLB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X80SLB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X80SLB Is Used
Automated Press Fitting
The high force output at a short stroke makes it ideal for pressing bearings, bushings, or pins into assemblies on automated production lines.
Heavy-Part Stops
Use the 3927 N force to act as a robust, sensor-monitored end-stop for pallets or heavy components on gravity or powered roller conveyors.
Mold Clamping
Provides powerful, consistent clamping force for small injection molds or welding fixtures, with magnetic sensors confirming the closed position.
Is the Airtac SC100 Standard Cylinder SC100X80SLB the Right Cylinder?
For applications needing more force, stepping up to the SC125 bore provides 6136 N of push force at 0.5 MPa. If a shorter overall body length is acceptable for a lower force, the SC80 bore offers 2513 N. When replacing this cylinder, match the 100 mm bore, 80 mm stroke, PT port thread, LB foot mounting style, and the integrated magnet (-S) for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X80SLB FAQ
At the standard 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
No. The SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder. It is not dimensionally interchangeable. It is a direct replacement only for another AirTAC SC100 cylinder with matching bore, stroke, and LB foot mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X80SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.