Airtac SC100 Standard Cylinder SC100X810
The AirTAC Airtac SC100 Standard Cylinder SC100X810 is a genuine double-acting standard air cylinder with a Ø100mm bore and 810mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke810 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X810
The AirTAC SC100X810 is a double-acting pneumatic cylinder delivering a substantial 3927 N of push force at 0.5 MPa, scaling up to 7068 N at the maximum operating pressure of 0.9 MPa. With an 810 mm stroke, this model is well-suited for applications requiring a long, powerful linear movement, such as material handling or large clamping fixtures.
Built on a robust tie-rod design with a 25 mm diameter piston rod and M20x1.5 rod thread, the SC100X810 provides reliable performance. The cylinder body length is 188 mm, resulting in a total extended length of approximately 998 mm. It features a 29 mm adjustable air cushion at each end to decelerate the piston smoothly, reducing end-of-stroke impact.
Airtac SC100 Standard Cylinder SC100X810 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X810 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 810 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X810
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×810 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X810 Is Used
Pallet Transfer
Moves heavy pallets or containers across a transfer station, using the 810 mm stroke for full travel across a conveyor width.
Press Tool Actuation
Provides the high force needed for a large forming or stamping press, with the long stroke accommodating deep draw operations.
Dock Lock Mechanism
Engages a heavy-duty locking bar on a loading dock, requiring the full 810 mm extension for secure vehicle restraint.
Is the Airtac SC100 Standard Cylinder SC100X810 the Right Cylinder?
When sizing, the SC100 bore provides a significant step up in force from the SC80, which outputs 2513 N at 0.5 MPa. For even higher force requirements, consider the SC125 bore at 6136 N. For this 810 mm stroke, ensure the load is guided externally if significant side forces are present, as the long extension can increase bending stress on the 25 mm rod. To replace an existing cylinder, match the 100 mm bore, 810 mm stroke, PT port thread, and basic mounting configuration exactly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X810 FAQ
At the standard 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N.
No, the SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 cylinder of the same bore. It is not dimensionally interchangeable. For replacement, match another AirTAC SC100 cylinder with the same stroke and port thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X810
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.