Airtac SC100 Standard Cylinder SC100X830S
The AirTAC Airtac SC100 Standard Cylinder SC100X830S is a genuine double-acting standard air cylinder with a Ø100mm bore and 830mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke830 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X830S
The SC100X830S is a double-acting tie-rod cylinder delivering 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa) from a 100 mm bore. Its 830 mm stroke suits mid-to-long linear movements in material handling and automation, with a 25 mm rod and PT1/2 ports.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for contactless position sensing. The adjustable pneumatic cushion (29 mm length) decelerates the piston near stroke end to reduce impact, while the TPU seals provide a standard operating range of -20 to +70 °C.
Airtac SC100 Standard Cylinder SC100X830S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X830S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 830 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X830S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×830 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X830S Is Used
Conveyor Diverter Gates
The 830 mm stroke and 3927 N push force reliably actuate wide diverter gates on packaging and sortation conveyors, with the built-in magnet enabling end-of-stroke sensor feedback to the PLC.
Automated Press Feeders
Delivers consistent, cushioned linear feed strokes for sheet metal or coil stock into stamping presses, where the 0.9 MPa thrust of 7068 N handles heavy pusher loads.
Pallet Layer Positioning
Positions pallet layers or slip sheets across an 830 mm span in automated palletising cells, with magnetic sensors confirming full extension and retraction for cycle safety.
Is the Airtac SC100 Standard Cylinder SC100X830S the Right Cylinder?
For higher force, step up to the SC125 (6136 N at 0.5 MPa); for a lighter, faster actuator, the SC80 offers 2513 N at 0.5 MPa. At 830 mm stroke, the 25 mm rod is long enough that side loads must be avoided—use an external linear guide or a guided cylinder if the load is not perfectly axial. When replacing an existing cylinder, match bore, stroke, PT port thread, the basic mounting style, and ensure the replacement also carries the -S magnet option for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X830S FAQ
At 0.5 MPa the push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix indicates a built-in magnet on the piston, so AirTAC CMSG, DMSG, or EMSG sensors can be clamped directly onto the barrel for non-contact position detection without external brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X830S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.