Airtac SC100 Standard Cylinder SC100X830SH
The AirTAC Airtac SC100 Standard Cylinder SC100X830SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 830mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke830 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X830SH
The AirTAC SC100X830SH is a double-acting tie-rod cylinder engineered for high-temperature applications, featuring a 100 mm bore and an 830 mm stroke. With the -S magnet option, a built-in magnetic piston allows direct mounting of CMSG/DMSG/EMSG reed or solid-state sensors on the barrel for precise end-of-stroke detection. The -H suffix specifies Viton (FKM) seals, extending the operating temperature range to 0–150 °C, making this actuator suitable for autoclaves, foundries, and hot process lines.
This model delivers a theoretical push force of 3927 N at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa, driven by a 25 mm diameter piston rod. The cylinder body length A is 188 mm, resulting in a total extended length of approximately 1018 mm. It features a 29 mm adjustable air cushion at both ends to decelerate the piston and reduce impact noise, with a PT1/2 port for standard pneumatic connections.
Airtac SC100 Standard Cylinder SC100X830SH Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X830SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 830 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X830SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×830 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X830SH Is Used
High-Temperature Process Actuation
Viton seals enable reliable operation in ovens, autoclaves, and steam-assisted machinery up to 150 °C, where standard seals would degrade.
Heavy Press & Clamping Systems
With 7068 N of force at 0.9 MPa, this cylinder powers industrial presses and heavy-duty clamps, with sensor feedback confirming clamp position.
Hot Material Handling & Sorting
The 830 mm stroke and magnetic piston sensors provide long-reach positioning for diverters and gates in foundry or glass-handling conveyor lines.
Is the Airtac SC100 Standard Cylinder SC100X830SH the Right Cylinder?
Select the SC100X830SH when your application demands a robust force output in a high-temperature environment. For a step down in force, the 80 mm bore SC80 series provides 2513 N at 0.5 MPa, while stepping up to the 125 mm bore SC125 series increases push force to 6136 N at the same pressure. This 830 mm stroke is well within the 1500 mm maximum standard stroke for the 100 mm bore.
For this long 830 mm stroke, ensure the 25 mm rod is protected from side loads to prevent bending and premature seal wear; use an external linear guide or a guided cylinder if off-axis forces are present. As a direct replacement, match the 100 mm bore, 830 mm stroke, PT1/2 port thread, built-in magnet (-S), and Viton seals (-H) to another AirTAC SC tie-rod cylinder. This model is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X830SH FAQ
At the standard 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
No. The SC100X830SH is a double-acting cylinder and will not hold its position if air pressure is exhausted or lost. The adjustable air cushions only decelerate the piston at the end of stroke. To hold a load safely, you must add an external rod brake, a mechanical lock, or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X830SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.