Airtac SC100 Standard Cylinder SC100X910SH
The AirTAC Airtac SC100 Standard Cylinder SC100X910SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 910mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke910 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X910SH
The SC100X910SH is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at the 0.9 MPa maximum operating pressure. With a 100 mm bore, 25 mm piston rod, and a 910 mm stroke, this model is built for applications demanding substantial force over a long linear distance.
This variant includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, enabling precise end-of-stroke detection without external brackets. The -H suffix specifies Viton (FKM) seals, extending the operating temperature range to 0–150 °C, making it suitable for high-temperature or chemically aggressive environments where standard TPU seals would degrade.
Airtac SC100 Standard Cylinder SC100X910SH Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X910SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 910 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X910SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×910 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X910SH Is Used
High-Temperature Material Handling
With Viton seals rated for 0–150 °C, this cylinder reliably operates pushers, gates, or diverters on conveyor lines near ovens, dryers, or autoclaves where standard seals would fail.
Hot Press & Clamping
Delivers up to 7068 N of clamping force at 0.9 MPa. The built-in magnet allows sensor feedback for automated hot-press cycles in woodworking, laminating, or composite curing processes.
Long-Stroke Actuation in Foundries
The 910 mm stroke moves heavy loads over a long distance. Combined with high-temperature seals, it is a robust choice for mold positioning or sand-rammer actuation in foundry environments.
Is the Airtac SC100 Standard Cylinder SC100X910SH the Right Cylinder?
For applications requiring less force, stepping down to an 80 mm bore (SC80) reduces push force to 2513 N at 0.5 MPa, saving energy and space. If greater force is needed, the 125 mm bore (SC125) provides 6136 N at the same pressure. At a 910 mm stroke, the unsupported rod length is significant; any side load will create a bending moment on the rod bearing. Use an external linear guide or a guided cylinder to absorb transverse forces and prevent premature seal wear or rod damage. For a drop-in replacement, match bore (100 mm), stroke (910 mm), PT port thread, the built-in magnet (-S), and the basic mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X910SH FAQ
At the standard 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The SC100 is a double-acting cylinder that requires continuous air pressure to maintain its position. If pressure is exhausted or the directional valve is centered, the piston will drift or drop under load. For load-holding applications, you must add an external rod lock, a mechanical brake, or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X910SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.