Airtac SC100 Standard Cylinder SC100X910SN
The AirTAC Airtac SC100 Standard Cylinder SC100X910SN is a genuine double-acting standard air cylinder with a Ø100mm bore and 910mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke910 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X910SN
The AirTAC SC100X910SN is a double-acting tie-rod cylinder delivering a push force of 3927 N at 0.5 MPa (up to 7068 N at 0.9 MPa). Its 100 mm bore and 25 mm diameter piston rod suit medium-to-heavy linear actuation tasks, while the 29 mm adjustable air cushion at each end decelerates the piston smoothly to reduce end-of-stroke impact.
This model includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG reed or solid-state sensors, enabling precise position feedback along the 910 mm stroke. The NBR seal (-N suffix) provides reliable sealing for standard industrial air service, and the PT1/2 port thread keeps the pneumatic connections straightforward.
Airtac SC100 Standard Cylinder SC100X910SN Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X910SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 910 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X910SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×910 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X910SN Is Used
Pallet Transfer
The 910 mm stroke and 3927 N push force at 0.5 MPa move pallets between conveyor lanes. The built-in magnet allows end-of-stroke sensors to confirm transfer completion.
Material Pusher
Pushes heavy workpieces onto a machining centre infeed. The NBR seals and adjustable cushion handle repetitive cycling, while the long stroke bridges a wide loading zone.
Long-Stroke Diverter
Diverts large cartons across a wide roller conveyor. The 25 mm rod and tie-rod construction provide the stiffness needed for sustained lateral guidance at full extension.
Is the Airtac SC100 Standard Cylinder SC100X910SN the Right Cylinder?
Choose the SC100 bore when your application needs roughly 3927 N of push force at 0.5 MPa. If you can accept a lighter, more compact actuator, stepping down to the SC80 bore (2513 N at 0.5 MPa) may reduce cost and air consumption. For higher force demands, the SC125 bore offers 6136 N at the same pressure.
At a 910 mm stroke, the piston rod is extended significantly. Ensure side loads are minimal; an external linear guide or a guided cylinder configuration is strongly recommended to protect the rod bearing from bending stress. For replacement, match bore (100 mm), stroke (910 mm), PT port thread, NBR seal, and the built-in magnet (-S) to another AirTAC SC100 tie-rod cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X910SN FAQ
At 0.5 MPa it produces 3927 N; at 0.7 MPa it reaches 5497 N, and at the maximum operating pressure of 0.9 MPa it delivers 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix indicates a built-in magnet, so you can clamp CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel to detect piston position without external brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X910SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.