Airtac SC100 Standard Cylinder SC100X95
The AirTAC Airtac SC100 Standard Cylinder SC100X95 is a genuine double-acting standard air cylinder with a Ø100mm bore and 95mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke95 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X95
The AirTAC SC100X95 is a double-acting tie-rod cylinder delivering a substantial 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa). With a 100 mm bore and a 95 mm stroke, it uses a 25 mm diameter chrome-plated rod and PT1/2 ports for high flow.
This model features a 29 mm adjustable air cushion at each end to decelerate the piston smoothly. The body length A is 188 mm, making the total extended length approximately 283 mm. Operating pressure ranges from 0.15 to 1.0 MPa with standard TPU seals rated for -20 to +70 °C.
Airtac SC100 Standard Cylinder SC100X95 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X95 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X95
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X95 Is Used
Pallet Stop & Lift
The 3927 N push force at 0.5 MPa easily raises or stops heavy pallets on conveyor lines, providing reliable material handling in distribution centres.
Clamping & Pressing
Ideal for heavy-duty clamping fixtures and small assembly presses. The 95 mm stroke gives a compact working envelope while the 25 mm rod resists bending under axial load.
Gate & Damper Actuation
Operates large slide gates or dampers in bulk material handling. The adjustable cushion absorbs impact at stroke ends, protecting the mechanism from shock loads.
Is the Airtac SC100 Standard Cylinder SC100X95 the Right Cylinder?
Choose the SC100X95 for applications needing around 4000 N of force at standard plant pressure. If your load is lighter, stepping down to an 80 mm bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For heavier loads, the 125 mm bore offers 6136 N at 0.5 MPa.
When replacing an existing cylinder, match five points: 100 mm bore, 95 mm stroke, PT1/2 port thread, basic (no mounting accessory) configuration, and the absence of a magnet. This SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X95 FAQ
At 0.5 MPa the cylinder pushes with 3927 N and pulls with 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC100X95 is a double-acting cylinder and does not lock or hold position when air is exhausted. If load holding is required, you must add a pilot-operated check valve or an external mechanical brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X95
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.