Airtac SC100 Standard Cylinder SC100X950S
The AirTAC Airtac SC100 Standard Cylinder SC100X950S is a genuine double-acting standard air cylinder with a Ø100mm bore and 950mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke950 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X950S
The AirTAC SC100X950S is a double-acting tie-rod cylinder delivering a push force of 3927 N at 0.5 MPa and up to 7068 N at 0.9 MPa. With a 100 mm bore and a 950 mm stroke, this model includes a built-in magnet for mounting CMSG/DMSG/EMSG sensors directly on the barrel.
This cylinder uses a 25 mm diameter rod with an M20x1.5 thread and PT1/2 ports. The adjustable pneumatic cushion is 29 mm long, and the body length A is 188 mm. It operates on filtered air from 0.15 to 1.0 MPa within a standard temperature range of -20 to +70 °C.
Airtac SC100 Standard Cylinder SC100X950S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X950S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X950S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X950S Is Used
Material Handling Pusher
Provides nearly 4000 N of force at standard shop air to push heavy totes or pallets off a conveyor line, with sensor confirmation via the integrated magnet.
Heavy-Duty Clamping
Delivers up to 7068 N of clamping force in large welding or assembly fixtures, holding steel fabrications securely during processing.
Automated Diverter Gate
Operates a high-flow diverter chute in bulk handling, using the 950 mm stroke to fully open or close a large material path.
Is the Airtac SC100 Standard Cylinder SC100X950S the Right Cylinder?
For applications needing slightly less force, the 80 mm bore SC80 series provides 2513 N of push at 0.5 MPa. If more force is required, step up to the 125 mm bore SC125 series delivering 6136 N at the same pressure. This SC100X950S is a genuine AirTAC tie-rod cylinder, not an ISO 15552 profile unit.
At a 950 mm stroke, the 25 mm rod is long and can be vulnerable to side loads. Ensure the load is guided externally or consider a guided cylinder if lateral forces are present. For a direct replacement, match the 100 mm bore, 950 mm stroke, PT1/2 ports, basic mount, and the -S magnet option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X950S FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N.
No, the SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 cylinder of the same bore and stroke. It is not dimensionally interchangeable. Only replace it with another AirTAC SC100 tie-rod cylinder matching the 950 mm stroke, PT1/2 ports, and -S magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X950S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.