Airtac SC100 Standard Cylinder SC100X950SCB
The AirTAC Airtac SC100 Standard Cylinder SC100X950SCB is a genuine double-acting standard air cylinder with a Ø100mm bore and 950mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke950 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X950SCB
The SC100X950SCB is a double-acting pneumatic cylinder delivering a robust 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa). Its 100 mm bore and 950 mm stroke suit demanding linear applications requiring substantial thrust over a long travel distance.
This model features a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, and a rear double clevis (CB) mount for pivoting installation. The 25 mm diameter rod provides high column strength, while the 29 mm adjustable air cushion at each end decelerates the piston smoothly. The body length A is 188 mm, with PT1/2 ports.
Airtac SC100 Standard Cylinder SC100X950SCB Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X950SCB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X950SCB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X950SCB Is Used
Pallet Lift & Transfer
The 3927 N push force at 0.5 MPa and 950 mm stroke provide the power and reach needed for lifting and transferring heavy pallets in automated storage and retrieval systems.
Heavy-Duty Clamping
Ideal for large-scale jigs and fixtures, this cylinder applies a controlled 7068 N clamping force at 0.9 MPa to secure heavy workpieces during machining or welding.
Product Pusher & Diverter
With a long 950 mm stroke, it can push large, heavy products completely off a main conveyor line onto a branch, handling substantial weight without stalling.
Is the Airtac SC100 Standard Cylinder SC100X950SCB the Right Cylinder?
For higher force, step up to the SC125 bore (6136 N at 0.5 MPa); for a lighter, more compact solution, the SC80 bore offers 2513 N at 0.5 MPa. This 950 mm stroke is within the standard 1500 mm maximum for the 100 mm bore.
At this long stroke, side loads must be carefully managed to prevent rod bending or bearing wear. Use an external guide system or a guided cylinder if the load is not perfectly axial. For a direct replacement, match the 100 mm bore, 950 mm stroke, PT1/4 port thread, CB rear double clevis mounting (F-SC100CB), and the built-in -S magnet for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X950SCB FAQ
The theoretical push force is 3927 N at 0.5 MPa and 7068 N at the maximum operating pressure of 0.9 MPa. The pull force on the return stroke is 3681 N at 0.5 MPa, due to the area of the 25 mm rod.
Yes, it is a direct replacement for any AirTAC SC100X950 cylinder configured with a built-in magnet (-S), a rear double clevis mount (CB), TPU seals, and PT ports. It is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X950SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.