Airtac SC100 Standard Cylinder SC100X95S
The AirTAC Airtac SC100 Standard Cylinder SC100X95S is a genuine double-acting standard air cylinder with a Ø100mm bore and 95mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke95 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X95S
This AirTAC SC100X95S is a double-acting tie-rod cylinder with a 100 mm bore and 95 mm stroke, delivering a push force of 3927 N at 0.5 MPa (7068 N at 0.9 MPa). The 25 mm diameter piston rod and 29 mm adjustable air cushion provide smooth deceleration for mid-stroke positioning tasks.
The integrated magnet (-S suffix) allows direct mounting of CMSG/DMSG/EMSG reed or solid-state sensors on the barrel for contactless position feedback. With a compact body length A of 188 mm and PT1/2 ports, it fits into automation cells where sensor confirmation of cylinder state is required without adding external brackets.
Airtac SC100 Standard Cylinder SC100X95S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X95S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X95S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X95S Is Used
Conveyor Stop & Sensor Gate
The 3927 N push force at 0.5 MPa stops medium pallets reliably. The built-in magnet lets a CMSG sensor confirm the gate is fully raised or lowered, integrating easily with conveyor control logic.
Press-Feed Ejection
Delivers 7068 N at 0.9 MPa to eject formed parts from a stamping die. Magnetic sensors verify rod retraction before the next press cycle, preventing tool crashes.
Automated Diverter Arm
A 95 mm stroke shifts a diverter chute between two lanes. The -S magnet provides end-of-travel signals to a PLC, ensuring the chute is locked into the correct position before product flow starts.
Is the Airtac SC100 Standard Cylinder SC100X95S the Right Cylinder?
For higher force, step up to the SC125 bore (6136 N push at 0.5 MPa). If a shorter stroke with sensor capability is needed, the SC100X75S is also within the standard range. This 95 mm stroke is a standard length for the 100 mm bore, which supports up to 1500 mm max standard stroke.
When replacing, match five points: 100 mm bore, 95 mm stroke, PT1/2 ports, the built-in magnet (-S), and basic mounting. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X95S FAQ
At 0.5 MPa, push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix indicates a built-in magnet in the piston. You can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel without any additional mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X95S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.