Airtac SC100 Standard Cylinder SC100X960
The AirTAC Airtac SC100 Standard Cylinder SC100X960 is a genuine double-acting standard air cylinder with a Ø100mm bore and 960mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke960 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X960
The AirTAC SC100X960 is a double-acting single-rod tie-rod cylinder delivering a push force of 3927 N at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and a long 960 mm stroke, it uses a 25 mm diameter piston rod with M20x1.5 male threads and PT1/2 pneumatic ports, making it a robust linear actuator for demanding industrial tasks.
This model features a body length A of 188 mm and a 29 mm adjustable air cushion at each end to decelerate the piston smoothly, reducing end-of-stroke impact. The standard TPU seals provide an operating temperature range of -20 to +70 °C. For position sensing, an external sensor bracket would be needed as this specific code does not include a built-in magnet.
Airtac SC100 Standard Cylinder SC100X960 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X960 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 960 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X960
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×960 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X960 Is Used
Long-Stroke Material Transfer
The 960 mm stroke and 3927 N push force efficiently shift heavy pallets or engine blocks across wide conveyor transfer stations where a long, controlled linear movement is essential.
Industrial Press Feed
Ideal for feeding large sheet metal blanks or composite panels into stamping presses, using its consistent 0.5-0.9 MPa thrust to overcome friction over a nearly 1-meter travel distance.
Automated Warehouse Pusher
Deployed on high-level picking systems to push rows of heavy cartons or tires onto gravity rollers, leveraging the full 960 mm reach and robust 25 mm rod to handle offset loads with proper external guidance.
Is the Airtac SC100 Standard Cylinder SC100X960 the Right Cylinder?
Select the SC100 bore when your application requires a push force between 3927 N (at 0.5 MPa) and 7068 N (at 0.9 MPa). If your force requirement is slightly lower, consider stepping down to the SC80 bore which provides 2513 N at 0.5 MPa; for significantly higher demands, the SC125 bore offers 6136 N at the same pressure. For this 960 mm stroke, side-load management is critical—the long, unsupported 25 mm rod is susceptible to bending under lateral forces, so always use an external linear guide or rod alignment coupler to protect the rod bearing and seals.
To ensure a correct drop-in replacement, match five key specifications: 100 mm bore, 960 mm stroke, PT1/2 port thread, the specific mounting accessory (this is a basic body, so no brackets are included), and the magnet option (this model has no built-in magnet). This cylinder is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X960 FAQ
At the standard operating pressure of 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. For any stroke of 300 mm or more, especially with a 25 mm rod, side loads can cause rod deflection, bearing wear, and premature seal failure. You must install an external guide system or use a guided cylinder variant to absorb lateral forces and ensure reliable operation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X960
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.