Airtac SC80 Standard Cylinder SC80X100N
The AirTAC Airtac SC80 Standard Cylinder SC80X100N is a genuine double-acting standard air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X100N
The SC80X100N is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, delivering a push force of 2513 N at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa. With an 80 mm bore and a 100 mm standard stroke, this model uses a 25 mm diameter piston rod with M20x1.5 male threads and PT1/8 port connections.
This configuration is specified with NBR (nitrile) seals, making it a cost-effective choice for general industrial applications within a standard temperature range. The cylinder features an adjustable pneumatic cushion over a 28 mm length to decelerate the piston smoothly at the end of each stroke, and its compact tie-rod body has a base length of 182 mm.
Airtac SC80 Standard Cylinder SC80X100N Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X100N |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X100N
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X100N Is Used
Material Handling Gates
Provides the robust force needed to operate diverter gates and stops on conveyor systems, reliably managing product flow in packaging and distribution lines.
Clamping & Pressing
Ideal for medium-duty clamping fixtures and assembly presses, where its 2513 N force at 0.5 MPa securely holds workpieces for welding, gluing, or machining operations.
Machine Tool Actuation
Used for tool changing mechanisms, safety door interlocks, and chip guard actuation on CNC machines, benefiting from the NBR seals' good wear resistance in oily workshop environments.
Is the Airtac SC80 Standard Cylinder SC80X100N the Right Cylinder?
For applications requiring a higher force output, consider stepping up to the SC100 series, which provides 3927 N of push force at 0.5 MPa. If space is a constraint and less force is needed, the SC63 series offers 1559 N at the same pressure. This basic model comes without a mounting bracket, so you will need to order accessories like the F-SC80LB foot mount or F-SC80FA front flange separately if required. To ensure a correct replacement, always match the bore, stroke, PT port thread, NBR seal material, and the basic mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X100N FAQ
At the standard operating pressure of 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. The maximum push force at the 0.9 MPa operating limit is 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No, this model code does not include the '-S' magnet suffix. It is built without a magnetic piston ring. To use CMSG or DMSG sensors for position feedback, you would need the SC80X100N-S variant, which includes a built-in magnet on the piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X100N
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.