Airtac SC80 Standard Cylinder SC80X100SLB
The AirTAC Airtac SC80 Standard Cylinder SC80X100SLB is a genuine double-acting standard air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X100SLB
The SC80X100SLB is an 80 mm bore double-acting tie-rod cylinder delivering 2513 N of push force at 0.5 MPa (4523 N at 0.9 MPa). With a 100 mm stroke and a 25 mm diameter piston rod, it provides a compact yet powerful linear motion solution for medium-duty industrial tasks.
This configuration includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, and the LB foot mount (F-SC80LB) for secure axial surface installation. The adjustable air cushion (28 mm length) decelerates the piston smoothly, protecting end-cap components during high-cycle operation.
Airtac SC80 Standard Cylinder SC80X100SLB Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X100SLB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X100SLB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X100SLB Is Used
Material Handling Gates
The 2513 N push force at 0.5 MPa easily operates diverter gates and stops on conveyor lines, while the LB foot mount provides a stable, fixed platform.
Clamping & Fixturing
Delivers consistent clamping pressure for machining fixtures. The built-in magnet allows end-of-stroke sensing to confirm part clamping before a cycle starts.
Packaging Presses
Provides the thrust needed for compact packaging presses. The TPU seals offer good wear resistance in the standard -20 to +70 °C temperature range.
Is the Airtac SC80 Standard Cylinder SC80X100SLB the Right Cylinder?
For higher force requirements, step up to the 100 mm bore SC100 series which provides 3927 N at 0.5 MPa. If space is constrained, the 63 mm bore offers 1559 N. The 100 mm stroke is well within the 1500 mm maximum standard stroke for this bore, ensuring standard lead times.
To ensure a correct replacement, match five points: 80 mm bore, 100 mm stroke, PT port thread, LB foot mounting accessory, and the built-in magnet (-S) for sensor compatibility. This is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X100SLB FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length (A=182 mm) than an equivalent ISO 15552 cylinder. It is not dimensionally interchangeable. Replace only with another AirTAC SC80 tie-rod cylinder matching the stroke, port, mount, and magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X100SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.