Airtac SC80 Standard Cylinder SC80X100TC
The AirTAC Airtac SC80 Standard Cylinder SC80X100TC is a genuine double-acting standard air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X100TC
The SC80X100TC is an 80 mm bore, 100 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series. It generates a push force of 2513 N at 0.5 MPa and up to 4523 N at the 0.9 MPa maximum operating pressure, driven by a 25 mm diameter piston rod.
This model is factory-configured with a TC centre trunnion mount, supplied with the TCM1 bracket (part code F-SC80TC), allowing the cylinder body to pivot during operation. The adjustable air cushion at each end, with a 28 mm cushion length, decelerates the piston smoothly, and the standard PT1/4 ports connect easily to common pneumatic circuits.
Airtac SC80 Standard Cylinder SC80X100TC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X100TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X100TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X100TC Is Used
Conveyor Diverter Gates
The 100 mm stroke and pivoting trunnion mount allow this cylinder to swing a diverter gate on a packaging or sorting conveyor, directing products between lanes with a 2513 N push at 0.5 MPa.
Clamping & Welding Fixtures
In a robotic welding cell, the SC80X100TC can pivot a clamping arm into place. The adjustable cushion ensures a gentle stop, protecting the fixture from impact damage during high-cycle operation.
Agricultural Equipment Actuation
Used on a harvester or spreader to control a pivoting chute or deflector plate. The trunnion mount handles the arcing motion, and the 25 mm rod withstands the dusty, high-vibration environment.
Is the Airtac SC80 Standard Cylinder SC80X100TC the Right Cylinder?
Choose the SC80X100TC when your application needs a pivoting cylinder with roughly 2500 N of force at standard plant pressure. If you require more force, stepping up to the SC100 bore provides 3927 N at 0.5 MPa; for a lighter, more compact solution, the SC63 bore delivers 1559 N. The centre trunnion mount is ideal for swinging or articulating loads, but ensure the pivot axis is correctly aligned to avoid side loading the rod.
For a direct replacement, match these five points: 80 mm bore, 100 mm stroke, PT port thread, TC centre trunnion mounting with the TCM1 bracket, and the absence of a built-in magnet. This cylinder is a genuine AirTAC SC tie-rod unit and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X100TC FAQ
At 0.5 MPa (approx. 73 psi), the cylinder pushes with 2513 N and pulls with 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than a comparable ISO 15552 profile cylinder. It will only directly replace another AirTAC SC tie-rod cylinder with the same bore, stroke, port thread, and TC trunnion mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X100TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.