Airtac SC80 Standard Cylinder SC80X100TCN
The AirTAC Airtac SC80 Standard Cylinder SC80X100TCN is a genuine double-acting standard air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X100TCN
The SC80X100TCN is an 80 mm bore, 100 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series, delivering 2513 N of push force at 0.5 MPa. This model is configured with a centre trunnion (TC) mount and NBR seals, making it suitable for pivoting applications in standard temperature environments.
Its 25 mm diameter piston rod and 28 mm adjustable air cushion provide smooth deceleration at stroke ends. The body length A is 182 mm, giving a total extended length of approximately 282 mm. With PT1/8 port threads, it operates on filtered air from 0.15 to 1.0 MPa across a temperature range of -20 to +70 °C.
Airtac SC80 Standard Cylinder SC80X100TCN Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X100TCN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X100TCN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X100TCN Is Used
Conveyor Diverter Gates
The 2513 N push force at 0.5 MPa and centre trunnion pivot make this cylinder ideal for actuating diverter arms on packaging lines, where the cylinder body must swing to follow the gate arc.
Clamping & Welding Fixtures
NBR seals provide reliable sealing with standard lubricated or non-lubricated air. The TC mount allows the cylinder to self-align in clamping mechanisms, preventing rod side-loading in jigs.
Hopper & Chute Actuation
With its 80 mm bore and robust tie-rod construction, this cylinder handles the repetitive pivoting motion needed to open and close discharge chutes on agricultural bins or silos.
Is the Airtac SC80 Standard Cylinder SC80X100TCN the Right Cylinder?
Select the SC80 bore when your application needs around 2513 N of force at 0.5 MPa. For lower force, step down to the SC63 which provides 1559 N; for higher demands, the SC100 delivers 3927 N at the same pressure. The 100 mm stroke is well within the 1500 mm maximum standard stroke for this bore.
This cylinder includes the TC centre trunnion mount (F-SC80TC), supplied with the TCM1 bracket, allowing the cylinder to pivot during operation. For a direct replacement, match the 80 mm bore, 100 mm stroke, PT port thread, NBR seal material, and the TC mounting style.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X100TCN FAQ
At 0.7 MPa operating pressure, the theoretical push force is 3518 N, and the pull force on the retract stroke is 2268 N. The maximum push force at 0.9 MPa is 4523 N.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 profile cylinder. It is not dimensionally interchangeable. Replace only with another AirTAC SC80 tie-rod cylinder matching the 100 mm stroke, TC mount, NBR seals, and PT ports.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X100TCN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.