Airtac SC80 Standard Cylinder SC80X1010S
The AirTAC Airtac SC80 Standard Cylinder SC80X1010S is a genuine double-acting standard air cylinder with a Ø80mm bore and 1010mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1010 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1010S
The AirTAC SC80X1010S is a double-acting tie-rod cylinder delivering 2513 N of push force at 0.5 MPa (4523 N at the maximum operating pressure of 0.9 MPa). Its 25 mm diameter piston rod and 28 mm adjustable air cushion are engineered for reliable mid-range industrial automation tasks requiring a substantial stroke.
This model features a built-in magnet, allowing CMSG, DMSG, or EMSG reed and solid-state sensors to be clamped directly onto the barrel for non-contact position sensing. With a body length of 182 mm, the total extended length reaches 1192 mm, making it suitable for applications where a long, guided linear movement is essential.
Airtac SC80 Standard Cylinder SC80X1010S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1010S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1010 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1010S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1010 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1010S Is Used
Long-Reach Part Transfer
Moves components across a wide conveyor gap. The 1010 mm stroke and sensor-ready design enable precise, multi-position transfer in packaging lines.
Automated Gluing Station
Extends a dispensing head along a 1-meter path. The adjustable cushion decelerates the 25 mm rod smoothly, preventing vibration that could affect bead consistency.
Vertical Door Actuation
Opens and closes a tall industrial door or hopper gate. The 2513 N force at 0.5 MPa provides ample power, while magnetic sensors confirm the fully open and closed positions.
Is the Airtac SC80 Standard Cylinder SC80X1010S the Right Cylinder?
For applications needing more force, stepping up to the SC100 bore provides 3927 N of push force at 0.5 MPa. If a shorter, more compact cylinder is sufficient, the SC63 bore offers 1559 N at the same pressure. This 1010 mm stroke is within the 1500 mm maximum standard stroke for the 80 mm bore.
At this extended stroke length, the piston rod is susceptible to bending under side loads. It is critical to use an external guide or linear rail to absorb any transverse forces, preventing premature rod bearing wear and seal failure. When replacing this cylinder, ensure the new unit matches the 80 mm bore, 1010 mm stroke, PT3/8 port thread, basic mounting configuration, and the built-in magnet (-S) for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1010S FAQ
At 0.5 MPa (approx. 73 psi), the push force is 2513 Newtons. The pull force at the same pressure is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
Yes. The 'S' suffix in the model code SC80X1010S indicates a built-in magnetic piston. This allows you to clamp compatible AirTAC CMSG, DMSG, or EMSG sensors onto the barrel's tie-rod slots for reliable, non-contact end-of-stroke or mid-stroke detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1010S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.