Airtac SC80 Standard Cylinder SC80X1030SN
The AirTAC Airtac SC80 Standard Cylinder SC80X1030SN is a genuine double-acting standard air cylinder with a Ø80mm bore and 1030mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1030 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1030SN
The AirTAC SC80X1030SN is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa. With an 80 mm bore and a 1030 mm stroke, this model is built for applications needing a long, powerful linear reach. The 25 mm diameter piston rod and 28 mm adjustable air cushion at each end help manage the inertia of heavy loads smoothly.
This specific configuration includes a built-in magnet (-S) for direct mounting of CMSG, DMSG, or EMSG sensors, enabling precise, non-contact position feedback. The NBR (nitrile) seals (-N) provide reliable sealing for standard industrial air supplies, while the PT port threads maintain compatibility with common pneumatic fittings. The total extended body length is approximately 1212 mm.
Airtac SC80 Standard Cylinder SC80X1030SN Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1030SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1030 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1030SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1030 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1030SN Is Used
Long-Reach Conveyor Diverter
The 1030 mm stroke provides ample reach for pusher or diverter arms on wide coneyor systems, sorting packages or pallets between lanes. The built-in magnet allows end-of-stroke sensing in dusty environments.
Sawmill Log Stop
In sawmill infeed decks, this cylinder can act as a heavy-duty log stop or singulator. The 2513 N force at 0.5 MPa is sufficient to halt rolling logs, and NBR seals are compatible with typical mill air supplies.
Pallet Lift & Transfer
Used in a pallet lift station, the long stroke can raise or transfer a full pallet between two conveyor heights. The adjustable cushion decelerates the 80 mm bore piston smoothly under heavy, shifting loads.
Is the Airtac SC80 Standard Cylinder SC80X1030SN the Right Cylinder?
Selecting the SC80X1030SN means choosing a high-force cylinder in the 80 mm bore class. If your application requires even more force, stepping up to the 100 mm bore SC100 series provides 3927 N of push at 0.5 MPa. For a more compact solution with lower force, the 63 mm bore offers 1559 N. At a 1030 mm stroke, the unsupported rod length is significant; any side loading will create a bending moment on the rod bearing. An external guide rail or rod-alignment coupler is strongly recommended to ensure long seal and bearing life. When replacing an existing unit, match the 80 mm bore, 1030 mm stroke, PT port thread, built-in magnet, and NBR seal material to guarantee identical form, fit, and function.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1030SN FAQ
At the standard 0.7 MPa (7 bar) operating pressure, the theoretical push force is 3518 N. The maximum push force at the 0.9 MPa limit is 4523 N. These forces are based on the 80 mm bore piston area.
Yes. The '-S' in the model code SC80X1030SN confirms a built-in magnet is installed on the piston. This allows AirTAC's CMSG (reed) or DMSG/EMSG (solid-state) sensors to be clamped directly onto the tie-rod barrel for contactless position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1030SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.