Airtac SC80 Standard Cylinder SC80X1035
The AirTAC Airtac SC80 Standard Cylinder SC80X1035 is a genuine double-acting standard air cylinder with a Ø80mm bore and 1035mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1035 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1035
The AirTAC SC80X1035 is a double-acting tie-rod cylinder delivering a substantial push force of 2513 N at 0.5 MPa (up to 4523 N at 0.9 MPa). Its 25 mm diameter piston rod and 28 mm adjustable air cushion at each end provide smooth deceleration for the 1035 mm stroke, making it suitable for medium-duty linear tasks where consistent pneumatic power is required.
This cylinder features a body length of 182 mm (A dimension) and PT3/8 ports as standard. The 80 mm bore sits in a force class that bridges general automation and heavier handling, offering a practical balance of power and compactness. It is a genuine AirTAC SC series unit, built for reliable double-acting operation with filtered air.
Airtac SC80 Standard Cylinder SC80X1035 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1035 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1035 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1035
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1035 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1035 Is Used
Material Transfer
Pushes or diverts boxes and totes on a conveyor line where a 1035 mm reach is needed to move product across a wide belt or between lanes.
Press-Fit Assembly
Provides the 2513 N force at 0.5 MPa for inserting bearings, bushings, or pins into housings in a semi-automated assembly station.
Bin Tipping
Actuates a tipping mechanism for bulk bins or hoppers, using the long stroke to achieve the necessary dump angle for granular materials.
Is the Airtac SC80 Standard Cylinder SC80X1035 the Right Cylinder?
Select the SC80 bore when your application needs around 2513 N of push force at standard shop air. If your load is lighter, stepping down to a 63 mm bore (1559 N at 0.5 MPa) can reduce air consumption and physical size. For higher force requirements, the 100 mm bore provides 3927 N at the same pressure.
With a 1035 mm stroke, the piston rod extends significantly. Long, unsupported strokes are vulnerable to side-load bending and rod bearing wear; always guide the load externally or consider a guided cylinder if lateral forces are present. For a direct replacement, match the 80 mm bore, 1035 mm stroke, PT3/8 port thread, basic mounting, and ensure the magnet option (-S) is absent.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1035 FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
Yes, the maximum standard stroke for the 80 mm bore is 1500 mm, so 1035 mm is a standard stroke length. No special order or non-standard lead time is required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1035
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.