Airtac SC80 Standard Cylinder SC80X1060SN
The AirTAC Airtac SC80 Standard Cylinder SC80X1060SN is a genuine double-acting standard air cylinder with a Ø80mm bore and 1060mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1060 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1060SN
The SC80X1060SN is a double-acting AirTAC SC tie-rod cylinder delivering 2513 N of push force at 0.5 MPa. Its 25 mm diameter piston rod and 28 mm adjustable air cushion are sized for mid-range pneumatic tasks, and the 1060 mm stroke fits long-transfer or material-handling applications within the standard stroke range for 80 mm bore.
This model includes a built-in magnet (-S) so CMSG, DMSG, or EMSG reed and solid-state sensors can be clamped directly onto the barrel for rod-position feedback. NBR seals (-N) are specified, and the PT port thread (PT3/8) is standard. The body length A is 182 mm, giving a total extended length of approximately 1242 mm.
Airtac SC80 Standard Cylinder SC80X1060SN Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1060SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1060 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1060SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1060 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1060SN Is Used
Long-Stroke Part Transfer
The 1060 mm stroke moves components between distant stations on assembly or packaging lines. The built-in magnet enables end-of-stroke and mid-stroke sensing for precise sequencing.
Pallet Dispensing
Pushes or pulls pallets in automated storage systems. The 2513 N force at 0.5 MPa handles heavy wooden or plastic pallets, while the adjustable cushion absorbs impact at the end of the long stroke.
Automated Gluing or Welding Jigs
Positions tooling across a wide span. Sensor feedback from the -S magnet confirms the cylinder has fully extended or retracted before the next cycle, protecting fixtures and parts.
Is the Airtac SC80 Standard Cylinder SC80X1060SN the Right Cylinder?
Choose the SC80 when the 50 mm bore’s 982 N at 0.5 MPa is insufficient; if you need more force, step up to the SC100 which delivers 3927 N at the same pressure. For this 1060 mm stroke, the rod is long and unsupported side loads can cause bending or premature bearing wear—use an external linear guide or a guided cylinder if the load is not purely axial.
To replace an existing cylinder, match five points: 80 mm bore, 1060 mm stroke, PT3/8 port thread, the built-in magnet (-S), and the basic (no bracket) mounting. The SC is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1060SN FAQ
At 0.5 MPa the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, push force reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
Yes. The -S suffix means a magnet is built into the piston, so AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors can be band-clamped to the barrel to detect rod position without mechanical switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1060SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.