Airtac SC80 Standard Cylinder SC80X1060TC
The AirTAC Airtac SC80 Standard Cylinder SC80X1060TC is a genuine double-acting standard air cylinder with a Ø80mm bore and 1060mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1060 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1060TC
The SC80X1060TC is an 80 mm bore double-acting pneumatic cylinder with a 1060 mm stroke, supplied with a centre trunnion (TC) mounting for pivoting applications. It generates a push force of 2513 N at 0.5 MPa and 4523 N at the maximum operating pressure of 0.9 MPa, driven by a 25 mm diameter piston rod.
This tie-rod cylinder uses a 28 mm adjustable air cushion to decelerate the piston at each end of its stroke, reducing impact and noise. The extended body length measures approximately 1242 mm, and the PT3/8 port and M20x1.5 rod thread provide robust connection points for pneumatic lines and tooling.
Airtac SC80 Standard Cylinder SC80X1060TC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1060TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1060 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1060TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1060 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1060TC Is Used
Conveyor Diverter Gates
The 1060 mm stroke and centre trunnion mount allow the cylinder to pivot as it extends, smoothly swinging a diverter gate across a wide conveyor line to sort packages or materials.
Welding Fixture Clamping
Provides a long-reach clamping action for large weldments. The trunnion mount lets the cylinder body swing to accommodate the fixture's arc, applying 2513 N of holding force at standard line pressure.
Agricultural Implement Positioning
Controls the angle of a large chute or sprayer boom on farm equipment. The robust tie-rod design and adjustable cushion handle dusty conditions and the inertial loads of a pivoting mass.
Is the Airtac SC80 Standard Cylinder SC80X1060TC the Right Cylinder?
For applications needing more force, stepping up to the SC100 bore delivers 3927 N at 0.5 MPa; for a lighter, faster-moving load, the SC63 bore provides 1559 N. The 1060 mm stroke is within the 1500 mm maximum standard stroke for this bore, but at this extended length, careful alignment is essential to prevent side-load bending on the 25 mm rod. For unsupported or off-axis loads, an external linear guide or a guided cylinder should be used to protect the rod bearing and seals.
To match an existing SC80X1060TC, confirm five points: 80 mm bore, 1060 mm stroke, PT thread, centre trunnion mount (TC with TCM1 bracket, part F-SC80TC), and the absence of a magnet. This model uses the default TPU seals for a -20 to +70 °C operating range.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1060TC FAQ
At 0.5 MPa, the cylinder pushes with 2513 N and pulls with 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
The TC suffix means the cylinder body is fitted with a centre trunnion for pivoting. It is designed to be used with the TCM1 trunnion bracket, and both are supplied together under the mounting kit code F-SC80TC. The trunnion point is positioned along the barrel to balance the cylinder's weight.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1060TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.