Airtac SC80 Standard Cylinder SC80X1070SN
The AirTAC Airtac SC80 Standard Cylinder SC80X1070SN is a genuine double-acting standard air cylinder with a Ø80mm bore and 1070mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1070 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1070SN
The AirTAC SC80X1070SN is a double-acting pneumatic cylinder with an 80 mm bore and a 1070 mm stroke, delivering a push force of 2513 N at 0.5 MPa and up to 4523 N at 0.9 MPa. This model is equipped with a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, and features NBR (nitrile) seals (-N suffix) for standard temperature operation from -20 to +70 °C.
The 25 mm diameter piston rod and 28 mm adjustable air cushion at each end provide smooth deceleration for high-cycle applications. With a body length (A) of 182 mm, the total extended length reaches approximately 1252 mm, making it suitable for long linear movements in material handling and automation systems where sensor feedback is required.
Airtac SC80 Standard Cylinder SC80X1070SN Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1070SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1070 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1070SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1070 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1070SN Is Used
Long-Stroke Material Transfer
The 1070 mm stroke and 2513 N push force at 0.5 MPa efficiently transfer heavy components between distant conveyor stations, with the built-in magnet enabling precise end-of-stroke sensing.
Automated Assembly Pushing
Delivers 4523 N of force at 0.9 MPa for pressing or clamping operations in automated assembly lines, with NBR seals providing reliable performance in standard factory environments.
Palletizing & Sorting Gates
Ideal for actuating tall sorting gates or palletizing stops in logistics hubs, using the long stroke and adjustable air cushion to manage heavy loads smoothly without hard stops.
Is the Airtac SC80 Standard Cylinder SC80X1070SN the Right Cylinder?
Choose the SC80 bore when your application needs between 2513 N (push at 0.5 MPa) and 4523 N (push at 0.9 MPa). If you require higher force, step up to the SC100 bore which provides 3927 N at 0.5 MPa; for a lighter, more compact solution, the SC63 bore offers 1559 N at 0.5 MPa. For this 1070 mm stroke, external guides or a guided cylinder are strongly recommended to protect the 25 mm rod from bending under side loads.
To replace this cylinder, match five critical points: the 80 mm bore, 1070 mm stroke, PT port thread, the built-in magnet for sensor compatibility, and the basic (no bracket) mounting configuration. This is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to another AirTAC SC80 of the same stroke and options.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1070SN FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf. Always use the push force for sizing to ensure reliable operation.
Yes, for a 1070 mm stroke with a 25 mm diameter rod, an external guide or a guided cylinder is strongly recommended. Long, unsupported strokes are susceptible to rod bending and bearing damage from side loads, which can cause premature seal wear and cylinder failure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1070SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.