Airtac SC80 Standard Cylinder SC80X1080S
The AirTAC Airtac SC80 Standard Cylinder SC80X1080S is a genuine double-acting standard air cylinder with a Ø80mm bore and 1080mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1080 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1080S
The AirTAC SC80X1080S is a double-acting single-rod pneumatic cylinder delivering 2513 N push force at 0.5 MPa (4523 N at 0.9 MPa). Its 80 mm bore and 1080 mm stroke suit long linear movements in material handling and industrial automation.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the tie-rod barrel for reliable end-of-stroke detection. The 25 mm diameter piston rod, PT3/8 ports, and 28 mm adjustable air cushion provide smooth deceleration without external shock absorbers.
Airtac SC80 Standard Cylinder SC80X1080S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1080S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1080 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1080S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1080 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1080S Is Used
Long-Reach Part Transfer
The 1080 mm stroke moves parts between distant conveyor lanes or workstations. The 2513 N push at 0.5 MPa handles heavy pallets or fixtures, while the adjustable cushion absorbs energy at end-of-travel.
Automated Gluing & Dispensing
Delivers a long, steady linear pass for adhesive or sealant bead application. The built-in magnet lets CMSG sensors confirm full retract and extend positions for precise cycle control.
Vertical Lift Gate Actuation
Raises and lowers tall industrial doors or lift gates. The 4523 N maximum thrust at 0.9 MPa lifts heavy panels; always use an external guide or guided cylinder for vertical side-load stability.
Is the Airtac SC80 Standard Cylinder SC80X1080S the Right Cylinder?
For higher force, step up to the 100 mm bore (3927 N at 0.5 MPa); for a lighter, more compact option, the 63 mm bore provides 1559 N. At 1080 mm stroke, side-load bending moment on the rod is significant—always guide the load externally or pair with a guided cylinder to protect the rod bearing and seals.
When replacing, match five points: 80 mm bore, 1080 mm stroke, PT3/8 port thread, basic mounting (no accessory bracket), and the built-in magnet (-S). This SC tie-rod cylinder is not ISO 15552 interchangeable; it matches another AirTAC SC80 of identical configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1080S FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, push force reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
Yes. The -S suffix indicates a built-in magnet inside the piston. This allows AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors to clamp onto the barrel tie-rods for contactless position sensing without external brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1080S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.