Airtac SC80 Standard Cylinder SC80X1095S
The AirTAC SC80 Standard Cylinder SC80X1095S is a genuine double-acting standard air cylinder with a Ø80mm bore and 1095mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1095 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X1095S
The AirTAC SC80X1095S is an 80 mm bore double-acting tie-rod cylinder delivering 2513 N of push force at 0.5 MPa and up to 4523 N at 0.9 MPa operating pressure. With a 1095 mm stroke, this model is within the standard stroke range for the 80 mm bore, which extends up to 1500 mm. The 25 mm diameter piston rod and PT3/8 port thread provide robust fluid power for medium-to-heavy linear actuation tasks.
The built-in magnet (denoted by the 'S' suffix) allows direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors along the barrel for precise, non-contact position feedback. The adjustable air cushion at both ends, with a 28 mm cushion length, decelerates the piston smoothly to reduce end-of-stroke impact, extending the service life of the cylinder and the machinery it drives.
Airtac SC80 Standard Cylinder SC80X1095S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1095S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1095 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1095S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1095 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1095S Is Used
Long-Stroke Material Transfer
The 1095 mm stroke is ideal for pushing or pulling products across wide conveyor gaps or transfer stations, with the built-in magnet providing end-of-stroke confirmation to the control system.
Automated Panel Indexing
Delivers the 2513 N force needed to index large wooden or composite panels in furniture and construction board processing lines, where the adjustable cushion ensures a gentle stop.
High-Bay Diverter Gate Actuation
Powers diverter gates in logistics sortation systems, using the 80 mm bore's force to reliably redirect packages. The magnet-equipped barrel simplifies sensor mounting for gate-open and gate-closed signals.
Is the Airtac SC80 Standard Cylinder SC80X1095S the Right Cylinder?
Select the SC80 bore when your application requires between 2513 N and 4523 N of force at standard plant air pressures. If your load demands more force, stepping up to the SC100 bore provides 3927 N at 0.5 MPa. For a lighter, more compact solution, the SC63 bore offers 1559 N at the same pressure. For this 1095 mm stroke, ensure the rod is protected from side loading; an external guide rail or a guided cylinder configuration is recommended to prevent rod bending and premature bearing wear.
To guarantee a correct replacement, match five key specifications: the 80 mm bore, the 1095 mm stroke, the PT3/8 port thread, the built-in magnet for sensor compatibility, and the basic (footless) mounting configuration. This tie-rod cylinder is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1095S FAQ
At the standard operating pressure of 0.7 MPa, the cylinder provides 3518 N of push force and 3176 N of pull force. The maximum push force at the 0.9 MPa operating limit is 4523 N, with a theoretical maximum of 513 kgf at 1.0 MPa.
No. The AirTAC SC series is a double-acting cylinder and will not hold its position when air pressure is exhausted or lost. The piston can drift or drop. For load-holding applications, you must add an external mechanical lock, a rod brake, or a pilot-operated check valve in the circuit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1095S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.