Airtac SC80 Standard Cylinder SC80X1095SN
The AirTAC Airtac SC80 Standard Cylinder SC80X1095SN is a genuine double-acting standard air cylinder with a Ø80mm bore and 1095mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1095 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1095SN
The AirTAC SC80X1095SN is an 80 mm bore, 1095 mm stroke double-acting tie-rod cylinder delivering 2513 N push force at 0.5 MPa (4523 N at 0.9 MPa). Its 25 mm diameter piston rod and 28 mm adjustable air cushion handle end-of-stroke deceleration reliably across this long travel.
This model includes a built-in magnet (-S suffix) for direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors, enabling precise position feedback without external brackets. The N suffix specifies NBR (nitrile) seals, suited for standard industrial air service. Ports are PT1/8 with an M20x1.5 rod thread, and the total extended body length is approximately 1277 mm (182 mm body + 1095 mm stroke).
Airtac SC80 Standard Cylinder SC80X1095SN Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1095SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1095 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1095SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1095 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1095SN Is Used
Long-Reach Part Transfer
The 1095 mm stroke pushes or pulls components across wide conveyor gaps or between distant stations. Built-in magnet sensors confirm end-of-travel, preventing cycle overlap.
Automated Gantry Pushing
Delivers 2513 N at standard plant pressure to advance tooling or push heavy fixtures along a gantry beam. The 28 mm cushion absorbs impact quietly at full speed.
Pallet Dispensing Systems
Extends deeply into a stack to separate or eject pallets one at a time. NBR seals and PT ports integrate easily with existing warehouse compressed air circuits.
Is the Airtac SC80 Standard Cylinder SC80X1095SN the Right Cylinder?
Choose the SC80 bore when your application needs between 2513 N and 4523 N of pneumatic force; step down to a 63 mm bore (1559 N at 0.5 MPa) for lighter loads or up to a 100 mm bore (3927 N at 0.5 MPa) for heavier work. At 1095 mm stroke, the extended 25 mm rod is susceptible to bending under side loads—always guide the load externally or pair this cylinder with a dedicated guide unit to protect the rod bearing and seals.
For a direct replacement, match five points: 80 mm bore, 1095 mm stroke, PT port thread, NBR seal material, and the built-in magnet for sensor compatibility. This tie-rod SC cylinder is shorter than an ISO 15552 profile and is not dimensionally interchangeable with that standard.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1095SN FAQ
At 0.7 MPa (7 bar) supply pressure, this 80 mm bore cylinder generates 3518 N of push force and 2268 N of pull force on the retract stroke, based on the official AirTAC SC series thrust table.
No. The AirTAC SC is a tie-rod cylinder with a shorter body length than an ISO 15552 cylinder of the same bore and stroke. It is not dimensionally interchangeable with ISO 15552 profiles. For a direct replacement, match another AirTAC SC80 tie-rod cylinder with the same stroke, port, magnet, and seal options.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1095SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.