Airtac SC80 Standard Cylinder SC80X110
The AirTAC Airtac SC80 Standard Cylinder SC80X110 is a genuine double-acting standard air cylinder with a Ø80mm bore and 110mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke110 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X110
The SC80X110 is an 80 mm bore, 110 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod family. It generates a push force of 2513 N at 0.5 MPa and 4523 N at the maximum operating pressure of 0.9 MPa, making it a capable mid-range actuator for industrial linear motion.
This model uses a 25 mm diameter piston rod with an M20x1.5 male thread and PT3/8 ports. The body length (A) is 182 mm, giving a total extended length of approximately 292 mm. An adjustable air cushion of 28 mm at each end decelerates the piston smoothly, reducing end-of-stroke impact.
Airtac SC80 Standard Cylinder SC80X110 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X110 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X110
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X110 Is Used
Package Sorting Gates
The 110 mm stroke and 2513 N push force at 0.5 MPa reliably divert medium-weight packages on conveyor lines, operating within the 30-800 mm/s speed range for high-throughput logistics.
Clamping & Fixturing
Delivers consistent, high clamping force for CNC machining fixtures or welding jigs. The adjustable cushion protects the fixture and workpiece from hammering at the end of the stroke.
Press & Forming Assist
Provides up to 4523 N of push force at 0.9 MPa for light pressing, forming, or stamping operations where a compact, tie-rod cylinder footprint is preferred over bulkier ISO 15552 alternatives.
Is the Airtac SC80 Standard Cylinder SC80X110 the Right Cylinder?
For applications needing more force than an SC63 (1559 N at 0.5 MPa), stepping up to this 80 mm bore nearly doubles the output. If side loads or moment loads are present, consider an external guide rail or a guided cylinder; the SC80X110's 25 mm rod is robust but not designed to support unsupported lateral forces.
When replacing an existing cylinder, match five key points: 80 mm bore, 110 mm stroke, PT3/8 port thread, basic (no mounting accessory), and no magnet. This ensures a direct dimensional and performance drop-in for another AirTAC SC80X110 tie-rod cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X110 FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
This specific model code (SC80X110) does not include the -S magnet option, so the piston does not have a built-in magnet. To use CMSG/DMSG/EMSG sensors, order the SC80X110-S variant, which includes a magnet ring for sensor activation directly on the barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X110
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.